ACC SHELL
DS0BUNDLE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
transmission FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
DisplayString, RowStatus,
TestAndIncr FROM SNMPv2-TC
ifIndex, InterfaceIndex FROM IF-MIB;
-- This is the MIB module for the DS0Bundle Interface
-- objects.
ds0Bundle MODULE-IDENTITY
LAST-UPDATED "9807161630Z"
ORGANIZATION "IETF Trunk MIB Working Group"
CONTACT-INFO
" David Fowler
Postal: Newbridge Networks Corporation
600 March Road
Kanata, Ontario, Canada K2K 2E6
Tel: +1 613 591 3600
Fax: +1 613 599 3619
E-mail: davef@newbridge.com"
DESCRIPTION
"The MIB module to describe
DS0 Bundle interfaces objects."
REVISION "9805242010Z"
DESCRIPTION
"Initial version of the DS0BUNDLE-MIB."
::= { transmission 82 }
--
-- The DS0 Bundle Config Group
--
-- Implementation of this group is mandatory for all
-- systems that use a DS0Bundle Interface.
--
-- The DS0 Bundle Config Group consists of one table:
-- DS0 Bundle Table
-- The DS0 Bundle Table
dsx0BundleNextIndex OBJECT-TYPE
SYNTAX TestAndIncr
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to assist the manager in
selecting a value for dsx0BundleIndex. Because
this object is of syntax TestAndIncr (see the
SNMPv2-TC document, RFC 1903) it can also be used
to avoid race conditions with multiple managers
trying to create rows in the table.
If the result of the SET for dsx0BundleNextIndex
is not success, this means the value has been
changed from index (i.e. another manager used the
value), so a new value is required.
The algorithm is:
done = false
while done == false
index = GET (dsx0BundleNextIndex.0)
SET (dsx0BundleNextIndex.0=index)
if (set failed)
done = false
else
SET(dsx0BundleRowStatus.index=createAndGo)
if (set failed)
done = false
else
done = true
other error handling"
::= { ds0Bundle 2 }
dsx0BundleTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dsx0BundleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There is an row in this table for each ds0Bundle
in the system. This table can be used to
(indirectly) create rows in the ifTable with
ifType = 'ds0Bundle(82)'."
::= { ds0Bundle 3 }
dsx0BundleEntry OBJECT-TYPE
SYNTAX Dsx0BundleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There is a row in entry in this table for each
ds0Bundle interface."
INDEX { dsx0BundleIndex }
::= { dsx0BundleTable 1 }
Dsx0BundleEntry ::=
SEQUENCE {
dsx0BundleIndex INTEGER,
dsx0BundleIfIndex InterfaceIndex,
dsx0BundleCircuitIdentifier DisplayString,
dsx0BundleRowStatus RowStatus
}
dsx0BundleIndex OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique identifier for a ds0Bundle. This is not
the same value as ifIndex. This table is not
indexed by ifIndex because the manager has to
choose the index in a createable row and the agent
must be allowed to select ifIndex values."
::= { dsx0BundleEntry 1 }
dsx0BundleIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex value the agent selected for the
(new) ds0Bundle interface."
::= { dsx0BundleEntry 2 }
dsx0BundleCircuitIdentifier OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable contains the transmission vendor's
circuit identifier, for the purpose of
facilitating troubleshooting."
::= { dsx0BundleEntry 3 }
dsx0BundleRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create and delete rows in
this table."
::= { dsx0BundleEntry 4 }
-- The DS0 Bonding Group
-- Implementation of this group is optional for all
-- systems that use a DS0Bundle Interface.
-- The DS0 Bonding Group consists of one table:
-- DS0 Bonding Table
-- The DS0 Bonding Table
dsx0BondingTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dsx0BondingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DS0 Bonding table."
::= { ds0Bundle 1 }
dsx0BondingEntry OBJECT-TYPE
SYNTAX Dsx0BondingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the DS0 Bonding table. There is a
row in this table for each DS0Bundle interface."
INDEX { ifIndex }
::= { dsx0BondingTable 1 }
Dsx0BondingEntry ::=
SEQUENCE {
dsx0BondMode INTEGER,
dsx0BondStatus INTEGER,
dsx0BondRowStatus RowStatus
}
dsx0BondMode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
other(2),
mode0(3),
mode1(4),
mode2(5),
mode3(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates which BONDing mode is used,
if any, for a ds0Bundle. Mode0 provides parameter
and number exchange with no synchronization. Mode
1 provides parameter and number exchange. Mode 1
also provides synchronization during
initialization but does not include inband
monitoring. Mode 2 provides all of the above plus
inband monitoring. Mode 2 also steals 1/64th of
the bandwidth of each channel (thus not supporting
n x 56/64 kbit/s data channels for most values of
n). Mode 3 provides all of the above, but also
provides n x 56/64 kbit/s data channels. Most
common implementations of Mode 3 add an extra
channel to support the inband monitoring overhead.
ModeNone should be used when the interface is not
performing bandwidth-on-demand."
::= { dsx0BondingEntry 1 }
dsx0BondStatus OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
callSetup(2),
dataTransfer(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current status of the
bonding call using this ds0Bundle. idle(1) should
be used when the bonding mode is set to none(1)."
::= { dsx0BondingEntry 2 }
dsx0BondRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create new rows in this
table, modify existing rows, and to delete
existing rows."
::= { dsx0BondingEntry 3 }
-- conformance information
ds0BundleConformance OBJECT IDENTIFIER ::= { ds0Bundle 4 }
ds0BundleGroups OBJECT IDENTIFIER
::= { ds0BundleConformance 1 }
ds0BundleCompliances OBJECT IDENTIFIER
::= { ds0BundleConformance 2 }
-- compliance statements
ds0BundleCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for DS0Bundle
interfaces."
MODULE -- this module
MANDATORY-GROUPS {ds0BundleConfigGroup }
GROUP ds0BondingGroup
DESCRIPTION
"Implementation of this group is optional for all
systems that attach to a DS0Bundle Interface."
OBJECT dsx0BundleRowStatus
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)
}
MIN-ACCESS read-only
DESCRIPTION
"The agent is not required to support a SET
operation to this object, and only three of the
six enumerated values for the RowStatus textual
convention need be supported. Only supporting
createAndGo for a creation process prevents the
manager from creating an inactive row in the
ds0BundleTable. Inactive rows in the
ds0BundleTable do not make sense."
OBJECT dsx0BundleCircuitIdentifier
MIN-ACCESS read-only
DESCRIPTION
"The agent is not required to support a SET
operation to this object."
::= { ds0BundleCompliances 1 }
-- units of conformance
ds0BondingGroup OBJECT-GROUP
OBJECTS { dsx0BondMode,
dsx0BondStatus,
dsx0BondRowStatus }
STATUS current
DESCRIPTION
"A collection of objects providing
configuration information applicable
to all DS0 interfaces."
::= { ds0BundleGroups 1 }
ds0BundleConfigGroup OBJECT-GROUP
OBJECTS { dsx0BundleNextIndex,
dsx0BundleIfIndex,
dsx0BundleCircuitIdentifier,
dsx0BundleRowStatus }
STATUS current
DESCRIPTION
"A collection of objects providing the ability to
create a new ds0Bundle in the ifTable as well as
configuration information about the ds0Bundle."
::= { ds0BundleGroups 2 }
END
ACC SHELL 2018