ACC SHELL
| Path : /usr/share/mibs/ietf/ |
|
|
| Current File : //usr/share/mibs/ietf/MPLS-LC-ATM-STD-MIB |
MPLS-LC-ATM-STD-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
RowStatus, StorageType, TruthValue
FROM SNMPv2-TC
AtmVpIdentifier
FROM ATM-TC-MIB
mplsStdMIB, MplsAtmVcIdentifier
FROM MPLS-TC-STD-MIB
mplsInterfaceIndex
FROM MPLS-LSR-STD-MIB
;
mplsLcAtmStdMIB MODULE-IDENTITY
LAST-UPDATED "200601120000Z" -- 12 January 2006
ORGANIZATION "Multiprotocol Label Switching (MPLS) Working Group"
CONTACT-INFO
" Thomas D. Nadeau
Postal: Cisco Systems, Inc.
250 Apollo Drive
Chelmsford, MA 01824
Tel: +1-978-244-3051
Email: tnadeau@cisco.com
Subrahmanya Hegde
Postal: Cisco Systems, Inc.
225 East Tazman Drive
Tel: +1-408-525-6562
Email: subrah@cisco.com
General comments should be sent to mpls@uu.net
"
DESCRIPTION
"This MIB module contains managed object definitions for
MPLS Label-Controlled ATM interfaces as defined in
[RFC3035].
Copyright (C) The Internet Society (2006). This
version of this MIB module is part of RFC 4368; see
the RFC itself for full legal notices."
-- Revision history.
REVISION
"200601120000Z" -- 12 January 2006
DESCRIPTION
"Initial revision, published as part of RFC 4368."
::= { mplsStdMIB 9 }
-- Top level components of this MIB module.
-- Tables, Scalars, Notifications, Conformance
mplsLcAtmStdNotifications OBJECT IDENTIFIER ::= { mplsLcAtmStdMIB 0 }
mplsLcAtmStdObjects OBJECT IDENTIFIER ::= { mplsLcAtmStdMIB 1 }
mplsLcAtmStdConformance OBJECT IDENTIFIER ::= { mplsLcAtmStdMIB 2 }
-- MPLS LC-ATM Interface Configuration Table.
mplsLcAtmStdInterfaceConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsLcAtmStdInterfaceConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies per-interface MPLS LC-ATM
capability and associated information. In particular,
this table sparsely extends the MPLS-LSR-STD-MIB's
mplsInterfaceConfTable."
::= { mplsLcAtmStdObjects 1 }
mplsLcAtmStdInterfaceConfEntry OBJECT-TYPE
SYNTAX MplsLcAtmStdInterfaceConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created by an LSR for
every interface capable of supporting MPLS LC-ATM.
Each entry in this table will exist only if a
corresponding entry in ifTable and mplsInterfaceConfTable
exists. If the associated entries in ifTable and
mplsInterfaceConfTable are deleted, the corresponding
entry in this table must also be deleted shortly
thereafter."
INDEX { mplsInterfaceIndex }
::= { mplsLcAtmStdInterfaceConfTable 1 }
MplsLcAtmStdInterfaceConfEntry ::= SEQUENCE {
mplsLcAtmStdCtrlVpi AtmVpIdentifier,
mplsLcAtmStdCtrlVci MplsAtmVcIdentifier,
mplsLcAtmStdUnlabTrafVpi AtmVpIdentifier,
mplsLcAtmStdUnlabTrafVci MplsAtmVcIdentifier,
mplsLcAtmStdVcMerge TruthValue,
mplsLcAtmVcDirectlyConnected TruthValue,
mplsLcAtmLcAtmVPI AtmVpIdentifier,
mplsLcAtmStdIfConfRowStatus RowStatus,
mplsLcAtmStdIfConfStorageType StorageType
}
mplsLcAtmStdCtrlVpi OBJECT-TYPE
SYNTAX AtmVpIdentifier
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the VPI value over which this
LSR is willing to accept control traffic on
this interface."
::= { mplsLcAtmStdInterfaceConfEntry 1 }
mplsLcAtmStdCtrlVci OBJECT-TYPE
SYNTAX MplsAtmVcIdentifier
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the VCI value over which this
LSR is willing to accept control traffic
on this interface."
::= { mplsLcAtmStdInterfaceConfEntry 2 }
mplsLcAtmStdUnlabTrafVpi OBJECT-TYPE
SYNTAX AtmVpIdentifier
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the VPI value over which this
LSR is willing to accept unlabeled traffic
on this interface."
::= { mplsLcAtmStdInterfaceConfEntry 3 }
mplsLcAtmStdUnlabTrafVci OBJECT-TYPE
SYNTAX MplsAtmVcIdentifier
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the VCI value over which this
LSR is willing to accept unlabeled traffic
on this interface."
::= { mplsLcAtmStdInterfaceConfEntry 4 }
mplsLcAtmStdVcMerge OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If set to true(1), indicates that this interface
is capable of ATM VC merge; otherwise, it MUST
be set to false(2)."
DEFVAL { false }
::= { mplsLcAtmStdInterfaceConfEntry 5 }
mplsLcAtmVcDirectlyConnected OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value indicates whether an LC-ATM is directly
or indirectly (by means of a VP) connected. If set to
true(1), indicates that this interface is directly
connected LC-ATM; otherwise, it MUST be set to
false(2). Note that although it can be intimated
from RFC 3057 that multiple VPs may be used,
in practice only a single one is used, and therefore
the authors of this MIB module have chosen to model
it as such."
DEFVAL { true }
::= { mplsLcAtmStdInterfaceConfEntry 6 }
mplsLcAtmLcAtmVPI OBJECT-TYPE
SYNTAX AtmVpIdentifier
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the VPI value used for indirectly
connected LC-ATM interfaces. For these
interfaces, the VPI field is not
available to MPLS, and the label MUST be
encoded entirely within the VCI field
(see [RFC3035]). If the interface is directly
connected, this value MUST be set to zero."
DEFVAL { 0 }
::= { mplsLcAtmStdInterfaceConfEntry 7 }
mplsLcAtmStdIfConfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create and
delete entries in this table. When configuring
entries in this table, the corresponding
ifEntry and mplsInterfaceConfEntry
MUST exist beforehand. If a manager attempts to
create an entry for a corresponding
mplsInterfaceConfEntry that does not support LC-ATM,
the agent MUST return an inconsistentValue error.
If this table is implemented read-only, then the
agent must set this object to active(1) when this
row is made active. If this table is implemented
writable, then an agent MUST not allow modification
to its objects once this value is set to active(1),
except to mplsLcAtmStdIfConfRowStatus and
mplsLcAtmStdIfConfStorageType."
::= { mplsLcAtmStdInterfaceConfEntry 8 }
mplsLcAtmStdIfConfStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value 'permanent(4)'
need not allow write-access to any columnar
objects in the row."
DEFVAL { nonVolatile }
::= { mplsLcAtmStdInterfaceConfEntry 9 }
-- End of mplsLcAtmStdInterfaceConfTable
-- Module compliance.
mplsLcAtmStdCompliances
OBJECT IDENTIFIER ::= { mplsLcAtmStdConformance 1 }
mplsLcAtmStdGroups
OBJECT IDENTIFIER ::= { mplsLcAtmStdConformance 2 }
-- Compliance requirement for full compliance
mplsLcAtmStdModuleFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for agents that provide
full support for MPLS-LC-ATM-STD-MIB. Such
devices can be monitored and also be configured
using this MIB module."
MODULE -- this module
MANDATORY-GROUPS {
mplsLcAtmStdIfGroup
}
OBJECT mplsLcAtmStdIfConfRowStatus
SYNTAX RowStatus { active(1), notInService(2) }
WRITE-SYNTAX RowStatus { active(1), notInService(2),
createAndGo(4), destroy(6)
}
DESCRIPTION "Support for createAndWait and notReady is
not required."
::= { mplsLcAtmStdCompliances 1 }
-- Compliance requirement for read-only implementations.
mplsLcAtmStdModuleReadOnlyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance requirement for implementations that only
provide read-only support for MPLS-LC-ATM-STD-MIB.
Such devices can be monitored but cannot be configured
using this MIB module.
"
MODULE -- this module
MANDATORY-GROUPS {
mplsLcAtmStdIfGroup
}
-- mplsLcAtmStdInterfaceConfTable
OBJECT mplsLcAtmStdCtrlVpi
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsLcAtmStdCtrlVci
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsLcAtmStdUnlabTrafVpi
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsLcAtmStdUnlabTrafVci
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsLcAtmStdVcMerge
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsLcAtmStdIfConfRowStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT mplsLcAtmVcDirectlyConnected
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsLcAtmLcAtmVPI
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsLcAtmStdIfConfStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { mplsLcAtmStdCompliances 2 }
-- Units of conformance.
mplsLcAtmStdIfGroup OBJECT-GROUP
OBJECTS {
mplsLcAtmStdCtrlVpi,
mplsLcAtmStdCtrlVci,
mplsLcAtmStdUnlabTrafVpi,
mplsLcAtmStdUnlabTrafVci,
mplsLcAtmStdVcMerge,
mplsLcAtmVcDirectlyConnected,
mplsLcAtmLcAtmVPI,
mplsLcAtmStdIfConfRowStatus,
mplsLcAtmStdIfConfStorageType
}
STATUS current
DESCRIPTION
"Collection of objects needed for MPLS LC-ATM
interface configuration."
::= { mplsLcAtmStdGroups 1 }
END
ACC SHELL 2018