ACC SHELL
TIME-AGGREGATE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, experimental,
OBJECT-TYPE, Opaque, Integer32
FROM SNMPv2-SMI
OwnerString
FROM RMON-MIB
RowStatus, StorageType, TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB;
tAggrMIB MODULE-IDENTITY
LAST-UPDATED "200604270000Z" -- 27 April 2006
ORGANIZATION "Cyber Solutions Inc. NetMan Working Group"
CONTACT-INFO
" Glenn Mansfield Keeni
Postal: Cyber Solutions Inc.
6-6-3, Minami Yoshinari
Aoba-ku, Sendai, Japan 989-3204.
Tel: +81-22-303-4012
Fax: +81-22-303-4015
E-mail: glenn@cysols.com
Support Group E-mail: mibsupport@cysols.com"
DESCRIPTION
"The MIB for servicing Time-Based aggregate
objects.
Copyright (C) The Internet Society (2006). This
version of this MIB module is part of RFC 4498;
see the RFC itself for full legal notices.
"
REVISION "200604270000Z" -- 27th April, 2006
DESCRIPTION "Initial version, published as RFC 4498."
::= { experimental 124 }
TAggrMOErrorStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This data type is used to model the error status of the
sampled MO instance. The error status for a sampled MO
instance is given in terms of two elements:
o The moIndex, which indicates the sample number of the MO
instance (starting at 1) in the value of the time-
aggregated MO instance.
o The moError, which indicates the error that was
encountered in sampling that MO instance.
The syntax in ASN.1 Notation will be
ErrorStatus :: = SEQUENCE {
moIndex Integer32,
moError SnmpPduErrorStatus
}
TAggrMOErrorStatus ::= SEQUENCE OF {
ErrorStatus
}
Note1: The command responder will supply values for all
the samples of the MO instance. If an error is
encountered for a sample, then the corresponding
value will have an ASN.1 value NULL, and an error
will be flagged in the corresponding
TAggrMOErrorStatus object.
Only MOs for which errors have been encountered will
the corresponding moIndex and moError values be set.
Note2: The error code for the component MO instances will be
in accordance with the SnmpPduErrorStatus TC defined
in the DISMAN-SCHEDULE-MIB[RFC3231].
"
SYNTAX Opaque (SIZE (0..1024))
TimeAggrMOValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This data type is used to model the time-aggregated MOs. It
will be a sequence of values. The syntax in ASN.1 Notation
will be
MOSampleValue :: = SEQUENCE {
value ObjectSyntax
}
TimeAggrMOValue ::= SEQUENCE OF {
MOSampleValue
}
where the first MOSampleValue, if any, will always be the
timestamp of the first sample in the aggregated object. The
subsequent values are the values of the MO instance sampled
at the specified intervals for the specified number of times.
Note: The command generator will need to know the
constituent MO instance and the sampling interval to
correctly interpret TimeAggrMOValue.
"
SYNTAX Opaque (SIZE (0..1024))
CompressedTimeAggrMOValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This data type is used to model the compressed
TAgMOs."
SYNTAX Opaque (SIZE (0..1024))
--
-- The Time-Based aggregation control table
--
tAggrCtlTable OBJECT-TYPE
SYNTAX SEQUENCE OF TAggrCtlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Time-Based aggregation control table. It controls
the aggregation of the samples of MO instances. There
will be a row for each TAgMO.
"
::= {tAggrMIB 1}
tAggrCtlEntry OBJECT-TYPE
SYNTAX TAggrCtlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row of the control table that defines one Time-Based
aggregate MO (TAgMO)."
INDEX {tAggrCtlEntryID }
::= {tAggrCtlTable 1 }
TAggrCtlEntry ::= SEQUENCE {
tAggrCtlEntryID
SnmpAdminString,
tAggrCtlMOInstance
OBJECT IDENTIFIER,
tAggrCtlAgMODescr
SnmpAdminString,
tAggrCtlInterval
Integer32,
tAggrCtlSamples
Integer32,
tAggrCtlCompressionAlgorithm
INTEGER,
tAggrCtlEntryOwner
OwnerString,
tAggrCtlEntryStorageType
StorageType,
tAggrCtlEntryStatus
RowStatus
}
tAggrCtlEntryID OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A locally unique, administratively assigned name
for this aggregated MO. It is used as an index to
uniquely identify this row in the table."
::= { tAggrCtlEntry 1 }
tAggrCtlMOInstance OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The sampled values of this MO instance will be
aggregated by the TAgMO.
"
::= { tAggrCtlEntry 2 }
tAggrCtlAgMODescr OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A textual description of the aggregate object."
::= {tAggrCtlEntry 3}
tAggrCtlInterval OBJECT-TYPE
SYNTAX Integer32
UNITS "micro seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interval, in microseconds, at which the MO instance
pointed at by tAggrInstance will be sampled for
Time-Based aggregation.
"
::= {tAggrCtlEntry 4}
tAggrCtlSamples OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of times at which the MO instance referred
to by tAggrInstance will be sampled for Time-Based
aggregation."
::= {tAggrCtlEntry 5}
-- only one compression algorithm is defined as of now.
tAggrCtlCompressionAlgorithm OBJECT-TYPE
SYNTAX INTEGER {
none (1),
deflate (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The compression algorithm that will be used by
the agent to compress the value of the TAgMO.
The deflate algorithm and corresponding data format
specification is described in RFC 1951. It is
compatible with the widely used gzip utility.
"
REFERENCE
"RFC1951 : DEFLATE Compressed Data Format Specification
version 1.3
"
DEFVAL { none }
::= {tAggrCtlEntry 6}
tAggrCtlEntryOwner OBJECT-TYPE
SYNTAX OwnerString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A textual description of the entity that created
this entry.
"
::= {tAggrCtlEntry 7}
tAggrCtlEntryStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines whether the parameters defined in
this row are kept in volatile storage and lost upon
reboot or backed up by non-volatile (permanent)
storage.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row.
"
::= {tAggrCtlEntry 8}
tAggrCtlEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status variable, used according to row
installation and removal conventions.
Objects in a row can be modified only when the value of
this object in the corresponding conceptual row is not
'active'.
Thus, to modify one or more of the objects in this
conceptual row,
a. change the row status to 'notInService',
b. change the values of the row, and
c. change the row status to 'active'.
The tAggrCtlEntryStatus may be changed to 'active' iff
all the MOs in the conceptual row have been assigned
valid values.
"
::= {tAggrCtlEntry 9}
--
-- tAggrDataTable: The data table.
--
tAggrDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF TAggrDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the data table. Each row of this table contains
information about a TAgMO indexed by tAggrCtlEntryID.
tAggrCtlEntryID is the key to the table. It is used to
identify instances of the TAgMO that are present in the
table.
"
::= {tAggrMIB 2}
tAggrDataEntry OBJECT-TYPE
SYNTAX TAggrDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information pertaining
to a TAgMO."
INDEX {tAggrCtlEntryID}
::= {tAggrDataTable 1 }
TAggrDataEntry ::= SEQUENCE {
tAggrDataRecord
TimeAggrMOValue,
tAggrDataRecordCompressed
CompressedTimeAggrMOValue,
tAggrDataErrorRecord
TAggrMOErrorStatus
}
tAggrDataRecord OBJECT-TYPE
SYNTAX TimeAggrMOValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The snapshot value of the TAgMO."
::= { tAggrDataEntry 1}
tAggrDataRecordCompressed OBJECT-TYPE
SYNTAX CompressedTimeAggrMOValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The compressed value of the TAgMO.
The compression algorithm will depend on the
tAggrCtlCompressionAlgorithm given in the corresponding
tAggrCtlEntry. If the value of the corresponding
tAggrCtlCompressionAlgorithm is (1) 'none', then the
value of all instances of this object will be a string
of zero length.
Note that the access privileges to this object will be
governed by the access privileges of the corresponding MO
instance. Thus, an entity attempting to access an
instance of this MO MUST have access rights to the
instance object pointed at by tAggrCtlMOInstance and this
MO instance.
"
::= { tAggrDataEntry 2}
tAggrDataErrorRecord OBJECT-TYPE
SYNTAX TAggrMOErrorStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The error status corresponding to the MO instance
samples aggregated in tAggrDataRecord (and
tAggrDataRecordCompressed)."
::= { tAggrDataEntry 3}
-- Conformance information
tAggrConformance OBJECT IDENTIFIER ::= { tAggrMIB 3 }
tAggrGroups OBJECT IDENTIFIER ::= { tAggrConformance 1 }
tAggrCompliances OBJECT IDENTIFIER ::= { tAggrConformance 2 }
-- Compliance statements
tAggrMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities
that implement the TIME-AGGREGATE-MIB."
MODULE -- this module
MANDATORY-GROUPS { tAggrMibBasicGroup }
::= { tAggrCompliances 1 }
-- Units of conformance
tAggrMibBasicGroup OBJECT-GROUP
OBJECTS {
tAggrCtlMOInstance,
tAggrCtlAgMODescr,
tAggrCtlInterval,
tAggrCtlSamples,
tAggrCtlCompressionAlgorithm,
tAggrCtlEntryOwner,
tAggrCtlEntryStorageType,
tAggrCtlEntryStatus,
tAggrDataRecord,
tAggrDataRecordCompressed,
tAggrDataErrorRecord
}
STATUS current
DESCRIPTION
"A collection of objects for Time-Based aggregation
of MOs."
::= { tAggrGroups 1 }
END
ACC SHELL 2018