ACC SHELL
#!/usr/bin/env perl
# conf.pl
#
# Copyright (c) 1999-2010 The SquirrelMail Project Team
# Licensed under the GNU GPL. For full terms see COPYING.
#
# A simple configure script to configure SquirrelMail
#
# $Id: conf.pl 13966 2010-07-21 07:25:48Z pdontthink $
############################################################
$conf_pl_version = "1.4.0";
############################################################
# Check what directory we're supposed to be running in, and
# change there if necessary. File::Basename has been in
# Perl since at least 5.003_7, and nobody sane runs anything
# before that, but just in case.
############################################################
my $dir;
if ( eval q{require "File/Basename.pm"} ) {
$dir = File::Basename::dirname($0);
chdir($dir);
}
############################################################
# Some people try to run this as a CGI. That's wrong!
############################################################
if ( defined( $ENV{'PATH_INFO'} )
|| defined( $ENV{'QUERY_STRING'} )
|| defined( $ENV{'REQUEST_METHOD'} ) ) {
print "Content-Type: text/html\n\n";
print "You must run this script from the command line.";
exit;
}
############################################################
# If we got here, use Cwd to get the full directory path
# (the Basename stuff above will sometimes return '.' as
# the base directory, which is not helpful here).
############################################################
use Cwd;
$dir = cwd();
############################################################
# First, lets read in the data already in there...
############################################################
if ( -e "config.php" ) {
# Make sure that file is readable
if (! -r "config.php") {
clear_screen();
print "WARNING:\n";
print "The file \"config/config.php\" was found, but you don't\n";
print "have rights to read it.\n";
print "\n";
print "Press any key to continue";
$ctu = <STDIN>;
exit;
}
open( FILE, "config.php" );
while ( $line = <FILE> ) {
$line =~ s/^\s+//;
$line =~ s/^\$//;
$var = $line;
$var =~ s/=/EQUALS/;
if ( $var =~ /^([a-z]|[A-Z])/ ) {
@o = split ( /\s*EQUALS\s*/, $var );
if ( $o[0] eq "config_version" ) {
$o[1] =~ s/[\n|\r]//g;
$o[1] =~ s/[\'|\"];\s*$//;
$o[1] =~ s/;$//;
$o[1] =~ s/^[\'|\"]//;
$config_version = $o[1];
close(FILE);
}
}
}
close(FILE);
if ( $config_version ne $conf_pl_version ) {
clear_screen();
print "WARNING:\n";
print " The file \"config/config.php\" was found, but it is for\n";
print " an older version of SquirrelMail. It is possible to still\n";
print " read the defaults from this file but be warned that many\n";
print " preferences change between versions. It is recommended that\n";
print " you start with a clean config.php for each upgrade that you\n";
print " do. To do this, just move config/config.php out of the way.\n";
print "\n";
print "Continue loading with the old config.php [y/N]? ";
$ctu = <STDIN>;
if ( ( $ctu !~ /^y\n/i ) || ( $ctu =~ /^\n/ ) ) {
exit;
}
print "\nDo you want me to stop warning you [y/N]? ";
$ctu = <STDIN>;
if ( $ctu =~ /^y\n/i ) {
$print_config_version = $conf_pl_version;
} else {
$print_config_version = $config_version;
}
} else {
$print_config_version = $config_version;
}
$config = 1;
open( FILE, "config.php" );
} elsif ( -e "config_default.php" ) {
open( FILE, "config_default.php" );
while ( $line = <FILE> ) {
$line =~ s/^\s+//;
$line =~ s/^\$//;
$var = $line;
$var =~ s/=/EQUALS/;
if ( $var =~ /^([a-z]|[A-Z])/ ) {
@o = split ( /\s*EQUALS\s*/, $var );
if ( $o[0] eq "config_version" ) {
$o[1] =~ s/[\n|\r]//g;
$o[1] =~ s/[\'|\"];\s*$//;
$o[1] =~ s/;$//;
$o[1] =~ s/^[\'|\"]//;
$config_version = $o[1];
close(FILE);
}
}
}
close(FILE);
if ( $config_version ne $conf_pl_version ) {
clear_screen();
print "WARNING:\n";
print " You are trying to use a 'config_default.php' from an older\n";
print " version of SquirrelMail. This is HIGHLY unrecommended. You\n";
print " should get the 'config_default.php' that matches the version\n";
print " of SquirrelMail that you are running. You can get this from\n";
print " the SquirrelMail web page by going to the following URL:\n";
print " http://squirrelmail.org.\n";
print "\n";
print "Continue loading with old config_default.php (a bad idea) [y/N]? ";
$ctu = <STDIN>;
if ( ( $ctu !~ /^y\n/i ) || ( $ctu =~ /^\n/ ) ) {
exit;
}
print "\nDo you want me to stop warning you [y/N]? ";
$ctu = <STDIN>;
if ( $ctu =~ /^y\n/i ) {
$print_config_version = $conf_pl_version;
} else {
$print_config_version = $config_version;
}
} else {
$print_config_version = $config_version;
}
$config = 2;
open( FILE, "config_default.php" );
} else {
print "No configuration file found. Please get config_default.php\n";
print "or config.php before running this again. This program needs\n";
print "a default config file to get default values.\n";
exit;
}
# Read and parse the current configuration file
# (either config.php or config_default.php).
while ( $line = <FILE> ) {
$line =~ s/^\s+//;
$line =~ s/^\$//;
$var = $line;
$var =~ s/=/EQUALS/;
if ( $var =~ /^([a-z]|[A-Z])/ ) {
@options = split ( /\s*EQUALS\s*/, $var );
$options[1] =~ s/[\n|\r]//g;
$options[1] =~ s/[\'|\"];\s*$//;
$options[1] =~ s/;$//;
$options[1] =~ s/^[\'|\"]//;
# de-escape escaped strings
$options[1] =~ s/\\'/'/g;
$options[1] =~ s/\\\\/\\/g;
if ( $options[0] =~ /^theme\[[0-9]+\]\[['|"]PATH['|"]\]/ ) {
$sub = $options[0];
$sub =~ s/\]\[['|"]PATH['|"]\]//;
$sub =~ s/.*\[//;
if ( -e "../themes" ) {
$options[1] =~ s/^\.\.\/config/\.\.\/themes/;
}
$theme_path[$sub] = &change_to_rel_path($options[1]);
} elsif ( $options[0] =~ /^theme\[[0-9]+\]\[['|"]NAME['|"]\]/ ) {
$sub = $options[0];
$sub =~ s/\]\[['|"]NAME['|"]\]//;
$sub =~ s/.*\[//;
$theme_name[$sub] = $options[1];
} elsif ( $options[0] =~ /^plugins\[[0-9]+\]/ ) {
$sub = $options[0];
$sub =~ s/\]//;
$sub =~ s/^plugins\[//;
$plugins[$sub] = $options[1];
} elsif ( $options[0] =~ /^ldap_server\[[0-9]+\]/ ) {
$sub = $options[0];
$sub =~ s/\]//;
$sub =~ s/^ldap_server\[//;
$continue = 0;
while ( ( $tmp = <FILE> ) && ( $continue != 1 ) ) {
if ( $tmp =~ /\);\s*$/ ) {
$continue = 1;
}
if ( $tmp =~ /^\s*[\'|\"]host[\'|\"]/i ) {
$tmp =~ s/^\s*[\'|\"]host[\'|\"]\s*=>\s*[\'|\"]//i;
$tmp =~ s/[\'|\"],?\s*$//;
$tmp =~ s/[\'|\"]\);\s*$//;
$host = $tmp;
} elsif ( $tmp =~ /^\s*[\'|\"]base[\'|\"]/i ) {
$tmp =~ s/^\s*[\'|\"]base[\'|\"]\s*=>\s*[\'|\"]//i;
$tmp =~ s/[\'|\"],?\s*$//;
$tmp =~ s/[\'|\"]\);\s*$//;
$base = $tmp;
} elsif ( $tmp =~ /^\s*[\'|\"]charset[\'|\"]/i ) {
$tmp =~ s/^\s*[\'|\"]charset[\'|\"]\s*=>\s*[\'|\"]//i;
$tmp =~ s/[\'|\"],?\s*$//;
$tmp =~ s/[\'|\"]\);\s*$//;
$charset = $tmp;
} elsif ( $tmp =~ /^\s*[\'|\"]port[\'|\"]/i ) {
$tmp =~ s/^\s*[\'|\"]port[\'|\"]\s*=>\s*[\'|\"]?//i;
$tmp =~ s/[\'|\"]?,?\s*$//;
$tmp =~ s/[\'|\"]?\);\s*$//;
$port = $tmp;
} elsif ( $tmp =~ /^\s*[\'|\"]maxrows[\'|\"]/i ) {
$tmp =~ s/^\s*[\'|\"]maxrows[\'|\"]\s*=>\s*[\'|\"]?//i;
$tmp =~ s/[\'|\"]?,?\s*$//;
$tmp =~ s/[\'|\"]?\);\s*$//;
$maxrows = $tmp;
} elsif ( $tmp =~ /^\s*[\'|\"]name[\'|\"]/i ) {
$tmp =~ s/^\s*[\'|\"]name[\'|\"]\s*=>\s*[\'|\"]//i;
$tmp =~ s/[\'|\"],?\s*$//;
$tmp =~ s/[\'|\"]\);\s*$//;
$name = $tmp;
} elsif ( $tmp =~ /^\s*[\'|\"]binddn[\'|\"]/i ) {
$tmp =~ s/^\s*[\'|\"]binddn[\'|\"]\s*=>\s*[\'|\"]//i;
$tmp =~ s/[\'|\"],?\s*$//;
$tmp =~ s/[\'|\"]\);\s*$//;
$binddn = $tmp;
} elsif ( $tmp =~ /^\s*[\'|\"]bindpw[\'|\"]/i ) {
$tmp =~ s/^\s*[\'|\"]bindpw[\'|\"]\s*=>\s*[\'|\"]//i;
$tmp =~ s/[\'|\"],?\s*$//;
$tmp =~ s/[\'|\"]\);\s*$//;
$bindpw = $tmp;
} elsif ( $tmp =~ /^\s*[\'|\"]protocol[\'|\"]/i ) {
$tmp =~ s/^\s*[\'|\"]protocol[\'|\"]\s*=>\s*[\'|\"]?//i;
$tmp =~ s/[\'|\"]?,?\s*$//;
$tmp =~ s/[\'|\"]?\);\s*$//;
$protocol = $tmp;
}
}
$ldap_host[$sub] = $host;
$ldap_base[$sub] = $base;
$ldap_name[$sub] = $name;
$ldap_port[$sub] = $port;
$ldap_maxrows[$sub] = $maxrows;
$ldap_charset[$sub] = $charset;
$ldap_binddn[$sub] = $binddn;
$ldap_bindpw[$sub] = $bindpw;
$ldap_protocol[$sub] = $protocol;
} elsif ( $options[0] =~ /^(data_dir|attachment_dir|theme_css|org_logo|signout_page)$/ ) {
${ $options[0] } = &change_to_rel_path($options[1]);
} else {
${ $options[0] } = $options[1];
}
}
}
close FILE;
# Default values used when option is missing
$useSendmail = "false" if ( lc($useSendmail) ne "true" );
$sendmail_path = "/usr/sbin/sendmail" if ( !$sendmail_path );
$pop_before_smtp = "false" if ( !$pop_before_smtp ) ;
$pop_before_smtp_host = '' if ( !$pop_before_smtp_host ) ;
$default_unseen_notify = 2 if ( !$default_unseen_notify );
$default_unseen_type = 1 if ( !$default_unseen_type );
$config_use_color = 0 if ( !$config_use_color );
$invert_time = "false" if ( !$invert_time );
$force_username_lowercase = "false" if ( !$force_username_lowercase );
$optional_delimiter = "detect" if ( !$optional_delimiter );
$auto_create_special = "false" if ( !$auto_create_special );
$default_use_priority = "true" if ( !$default_use_priority );
$hide_sm_attributions = "false" if ( !$hide_sm_attributions );
$default_use_mdn = "true" if ( !$default_use_mdn );
$delete_folder = "false" if ( !$delete_folder );
$noselect_fix_enable = "false" if ( !$noselect_fix_enable );
$frame_top = "_top" if ( !$frame_top );
$provider_uri = "http://squirrelmail.org/" if ( !$provider_uri );
$provider_name = "SquirrelMail" if ( !$provider_name );
$edit_identity = "true" if ( !$edit_identity );
$edit_name = "true" if ( !$edit_name );
$allow_thread_sort = 'false' if ( !$allow_thread_sort ) ;
$allow_server_sort = 'false' if ( !$allow_server_sort );
$uid_support = 'true' if ( !$uid_support );
$no_list_for_subscribe = 'false' if ( !$no_list_for_subscribe );
$allow_charset_search = 'true' if ( !$allow_charset_search );
$prefs_user_field = 'user' if ( !$prefs_user_field );
$prefs_key_field = 'prefkey' if ( !$prefs_key_field );
$prefs_val_field = 'prefval' if ( !$prefs_val_field );
$use_smtp_tls= 'false' if ( !$use_smtp_tls);
$smtp_auth_mech = 'none' if ( !$smtp_auth_mech );
$use_imap_tls = 'false' if ( !$use_imap_tls );
$imap_auth_mech = 'login' if ( !$imap_auth_mech );
$session_name = 'SQMSESSID' if (!$session_name );
$default_use_javascript_addr_book = 'false' if (! $default_use_javascript_addr_book);
# Added in 1.4.4
$lossy_encoding = 'false' if ( !$lossy_encoding );
$addrbook_global_dsn = '' if ( !$addrbook_global_dsn );
$addrbook_global_table = 'global_abook' if ( !$addrbook_global_table );
$addrbook_global_writeable = 'false' if ( !$addrbook_global_writeable );
$addrbook_global_listing = 'false' if ( !$addrbook_global_listing );
$abook_global_file = '' if ( !$abook_global_file);
$abook_global_file_writeable = 'false' if ( !$abook_global_file_writeable);
# Added in 1.4.5
$hide_auth_header = "false" if ( !$hide_auth_header );
$encode_header_key = '' if ( !$encode_header_key );
# Added in 1.4.8
$config_location_base = '' if ( !$config_location_base );
# add qmail-inject test here for backwards compatibility
if ( !$sendmail_args && $sendmail_path =~ /qmail-inject/ ) {
$sendmail_args = '';
} elsif ( !$sendmail_args ) {
$sendmail_args = '-i -t';
}
# Added in 1.4.11
$smtp_sitewide_user = '' if ( !$smtp_sitewide_user );
$smtp_sitewide_pass = '' if ( !$smtp_sitewide_pass );
# Added in 1.4.9
$abook_global_file_listing = 'true' if ( !$abook_global_file_listing );
$abook_file_line_length = 2048 if ( !$abook_file_line_length );
# Added in 1.4.16
$only_secure_cookies = 'true' if ( !$only_secure_cookies );
# Added in 1.4.20RC1
$disable_security_tokens = 'false' if ( !$disable_security_tokens );
$check_referrer = '' if ( !$check_referrer );
if ( $ARGV[0] eq '--install-plugin' ) {
print "Activating plugin " . $ARGV[1] . "\n";
if ( -d "../plugins/" . $ARGV[1]) {
push @plugins, $ARGV[1];
save_data();
exit(0);
} else {
print "No such plugin.\n";
exit(1);
}
} elsif ( $ARGV[0] eq '--remove-plugin' ) {
print "Removing plugin " . $ARGV[1] . "\n";
foreach $plugin (@plugins) {
if ( $plugin ne $ARGV[1] ) {
push @newplugins, $plugin;
}
}
@plugins = @newplugins;
save_data();
exit(0);
}
####################################################################################
# used in multiple places, define once
$list_supported_imap_servers =
" bincimap = Binc IMAP server\n" .
" courier = Courier IMAP server\n" .
" cyrus = Cyrus IMAP server\n" .
" dovecot = Dovecot Secure IMAP server\n" .
" exchange = Microsoft Exchange IMAP server\n" .
" hmailserver = hMailServer\n" .
" macosx = Mac OS X Mailserver\n" .
" mercury32 = Mercury/32\n" .
" uw = University of Washington's IMAP server\n" .
" gmail = IMAP access to Google mail (Gmail) accounts\n";
#####################################################################################
if ( $config_use_color == 1 ) {
$WHT = "\x1B[1m";
$NRM = "\x1B[0m";
} else {
$WHT = "";
$NRM = "";
$config_use_color = 2;
}
while ( ( $command ne "q" ) && ( $command ne "Q" ) ) {
clear_screen();
print $WHT. "SquirrelMail Configuration : " . $NRM;
if ( $config == 1 ) { print "Read: config.php"; }
elsif ( $config == 2 ) { print "Read: config_default.php"; }
print " ($print_config_version)\n";
print "---------------------------------------------------------\n";
if ( $menu == 0 ) {
print $WHT. "Main Menu --\n" . $NRM;
print "1. Organization Preferences\n";
print "2. Server Settings\n";
print "3. Folder Defaults\n";
print "4. General Options\n";
print "5. Themes\n";
print "6. Address Books\n";
print "7. Message of the Day (MOTD)\n";
print "8. Plugins\n";
print "9. Database\n";
print "10. Languages\n";
print "\n";
print "D. Set pre-defined settings for specific IMAP servers\n";
print "\n";
} elsif ( $menu == 1 ) {
print $WHT. "Organization Preferences\n" . $NRM;
print "1. Organization Name : $WHT$org_name$NRM\n";
print "2. Organization Logo : $WHT$org_logo$NRM\n";
print "3. Org. Logo Width/Height : $WHT($org_logo_width/$org_logo_height)$NRM\n";
print "4. Organization Title : $WHT$org_title$NRM\n";
print "5. Signout Page : $WHT$signout_page$NRM\n";
print "6. Top Frame : $WHT$frame_top$NRM\n";
print "7. Provider link : $WHT$provider_uri$NRM\n";
print "8. Provider name : $WHT$provider_name$NRM\n";
print "\n";
print "R Return to Main Menu\n";
} elsif ( $menu == 2 ) {
print $WHT. "Server Settings\n\n" . $NRM;
print $WHT . "General" . $NRM . "\n";
print "-------\n";
print "1. Domain : $WHT$domain$NRM\n";
print "2. Invert Time : $WHT$invert_time$NRM\n";
print "3. Sendmail or SMTP : $WHT";
if ( lc($useSendmail) eq "true" ) {
print "Sendmail";
} else {
print "SMTP";
}
print "$NRM\n";
print "\n";
if ( $show_imap_settings ) {
print $WHT . "IMAP Settings". $NRM . "\n--------------\n";
print "4. IMAP Server : $WHT$imapServerAddress$NRM\n";
print "5. IMAP Port : $WHT$imapPort$NRM\n";
print "6. Authentication type : $WHT$imap_auth_mech$NRM\n";
print "7. Secure IMAP (TLS) : $WHT$use_imap_tls$NRM\n";
print "8. Server software : $WHT$imap_server_type$NRM\n";
print "9. Delimiter : $WHT$optional_delimiter$NRM\n";
print "\n";
} elsif ( $show_smtp_settings ) {
if ( lc($useSendmail) eq "true" ) {
print $WHT . "Sendmail" . $NRM . "\n--------\n";
print "4. Sendmail Path : $WHT$sendmail_path$NRM\n";
print "5. Sendmail arguments : $WHT$sendmail_args$NRM\n";
print "6. Header encryption key : $WHT$encode_header_key$NRM\n";
print "\n";
} else {
print $WHT . "SMTP Settings" . $NRM . "\n-------------\n";
print "4. SMTP Server : $WHT$smtpServerAddress$NRM\n";
print "5. SMTP Port : $WHT$smtpPort$NRM\n";
print "6. POP before SMTP : $WHT$pop_before_smtp$NRM\n";
print "7. SMTP Authentication : $WHT$smtp_auth_mech" . display_smtp_sitewide_userpass() . "$NRM\n";
print "8. Secure SMTP (TLS) : $WHT$use_smtp_tls$NRM\n";
print "9. Header encryption key : $WHT$encode_header_key$NRM\n";
print "\n";
}
}
if ($show_imap_settings == 0) {
print "A. Update IMAP Settings : ";
print "$WHT$imapServerAddress$NRM:";
print "$WHT$imapPort$NRM ";
print "($WHT$imap_server_type$NRM)\n";
}
if ($show_smtp_settings == 0) {
if ( lc($useSendmail) eq "true" ) {
print "B. Change Sendmail Config : $WHT$sendmail_path$NRM\n";
} else {
print "B. Update SMTP Settings : ";
print "$WHT$smtpServerAddress$NRM:";
print "$WHT$smtpPort$NRM\n";
}
}
if ( $show_smtp_settings || $show_imap_settings )
{
print "H. Hide " .
($show_imap_settings ? "IMAP Server" :
(lc($useSendmail) eq "true") ? "Sendmail" : "SMTP") . " Settings\n";
}
print "\n";
print "R Return to Main Menu\n";
} elsif ( $menu == 3 ) {
print $WHT. "Folder Defaults\n" . $NRM;
print "1. Default Folder Prefix : $WHT$default_folder_prefix$NRM\n";
print "2. Show Folder Prefix Option : $WHT$show_prefix_option$NRM\n";
print "3. Trash Folder : $WHT$trash_folder$NRM\n";
print "4. Sent Folder : $WHT$sent_folder$NRM\n";
print "5. Drafts Folder : $WHT$draft_folder$NRM\n";
print "6. By default, move to trash : $WHT$default_move_to_trash$NRM\n";
print "7. By default, save sent messages : $WHT$default_move_to_sent$NRM\n";
print "8. By default, save as draft : $WHT$default_save_as_draft$NRM\n";
print "9. List Special Folders First : $WHT$list_special_folders_first$NRM\n";
print "10. Show Special Folders Color : $WHT$use_special_folder_color$NRM\n";
print "11. Auto Expunge : $WHT$auto_expunge$NRM\n";
print "12. Default Sub. of INBOX : $WHT$default_sub_of_inbox$NRM\n";
print "13. Show 'Contain Sub.' Option : $WHT$show_contain_subfolders_option$NRM\n";
print "14. Default Unseen Notify : $WHT$default_unseen_notify$NRM\n";
print "15. Default Unseen Type : $WHT$default_unseen_type$NRM\n";
print "16. Auto Create Special Folders : $WHT$auto_create_special$NRM\n";
print "17. Folder Delete Bypasses Trash : $WHT$delete_folder$NRM\n";
print "18. Enable /NoSelect folder fix : $WHT$noselect_fix_enable$NRM\n";
print "\n";
print "R Return to Main Menu\n";
} elsif ( $menu == 4 ) {
print $WHT. "General Options\n" . $NRM;
print "1. Data Directory : $WHT$data_dir$NRM\n";
print "2. Attachment Directory : $WHT$attachment_dir$NRM\n";
print "3. Directory Hash Level : $WHT$dir_hash_level$NRM\n";
print "4. Default Left Size : $WHT$default_left_size$NRM\n";
print "5. Usernames in Lowercase : $WHT$force_username_lowercase$NRM\n";
print "6. Allow use of priority : $WHT$default_use_priority$NRM\n";
print "7. Hide SM attributions : $WHT$hide_sm_attributions$NRM\n";
print "8. Allow use of receipts : $WHT$default_use_mdn$NRM\n";
print "9. Allow editing of identity : $WHT$edit_identity$NRM\n";
print " Allow editing of name : $WHT$edit_name$NRM\n";
print " Remove username from header : $WHT$hide_auth_header$NRM\n";
print "10. Allow server thread sort : $WHT$allow_thread_sort$NRM\n";
print "11. Allow server-side sorting : $WHT$allow_server_sort$NRM\n";
print "12. Allow server charset search : $WHT$allow_charset_search$NRM\n";
print "13. Enable UID support : $WHT$uid_support$NRM\n";
print "14. PHP session name : $WHT$session_name$NRM\n";
print "15. Location base : $WHT$config_location_base$NRM\n";
print "16. Only secure cookies if poss. : $WHT$only_secure_cookies$NRM\n";
print "17. Disable secure forms : $WHT$disable_security_tokens$NRM\n";
print "18. Page referal requirement : $WHT$check_referrer$NRM\n";
print "\n";
print "R Return to Main Menu\n";
} elsif ( $menu == 5 ) {
print $WHT. "Themes\n" . $NRM;
print "1. Change Themes\n";
for ( $count = 0 ; $count <= $#theme_name/2 ; $count++ ) {
$temp_name = $theme_name[$count*2];
printf " %s%*s %s\n", $temp_name,
40 - length($temp_name), " ",
$theme_name[($count*2)+1];
}
print "2. CSS File : $WHT$theme_css$NRM\n";
print "\n";
print "R Return to Main Menu\n";
} elsif ( $menu == 6 ) {
print $WHT. "Address Books\n" . $NRM;
print "1. Change LDAP Servers\n";
for ( $count = 0 ; $count <= $#ldap_host ; $count++ ) {
print " > $ldap_host[$count]\n";
}
print "2. Use Javascript Address Book Search : $WHT$default_use_javascript_addr_book$NRM\n";
print "3. Global file address book : $WHT$abook_global_file$NRM\n";
print "4. Allow writing into global file address book : $WHT$abook_global_file_writeable$NRM\n";
print "5. Allow listing of global file address book : $WHT$abook_global_file_listing$NRM\n";
print "6. Allowed address book line length : $WHT$abook_file_line_length$NRM\n";
print "\n";
print "R Return to Main Menu\n";
} elsif ( $menu == 7 ) {
print $WHT. "Message of the Day (MOTD)\n" . $NRM;
print "\n$motd\n";
print "\n";
print "1 Edit the MOTD\n";
print "\n";
print "R Return to Main Menu\n";
} elsif ( $menu == 8 ) {
print $WHT. "Plugins\n" . $NRM;
print " Installed Plugins\n";
$num = 0;
for ( $count = 0 ; $count <= $#plugins ; $count++ ) {
$num = $count + 1;
print " $num. $plugins[$count]\n";
}
print "\n Available Plugins:\n";
opendir( DIR, "../plugins" );
@files = sort(readdir(DIR));
$pos = 0;
@unused_plugins = ();
for ( $i = 0 ; $i <= $#files ; $i++ ) {
if ( -d "../plugins/" . $files[$i] && $files[$i] !~ /^\./ && $files[$i] ne "CVS" ) {
$match = 0;
for ( $k = 0 ; $k <= $#plugins ; $k++ ) {
if ( $plugins[$k] eq $files[$i] ) {
$match = 1;
}
}
if ( $match == 0 ) {
$unused_plugins[$pos] = $files[$i];
$pos++;
}
}
}
for ( $i = 0 ; $i <= $#unused_plugins ; $i++ ) {
$num = $num + 1;
print " $num. $unused_plugins[$i]\n";
}
closedir DIR;
print "\n";
print "R Return to Main Menu\n";
} elsif ( $menu == 9 ) {
print $WHT. "Database\n" . $NRM;
print "1. DSN for Address Book : $WHT$addrbook_dsn$NRM\n";
print "2. Table for Address Book : $WHT$addrbook_table$NRM\n";
print "\n";
print "3. DSN for Preferences : $WHT$prefs_dsn$NRM\n";
print "4. Table for Preferences : $WHT$prefs_table$NRM\n";
print "5. Field for username : $WHT$prefs_user_field$NRM\n";
print "6. Field for prefs key : $WHT$prefs_key_field$NRM\n";
print "7. Field for prefs value : $WHT$prefs_val_field$NRM\n";
print "\n";
print "8. DSN for Global Address Book : $WHT$addrbook_global_dsn$NRM\n";
print "9. Table for Global Address Book : $WHT$addrbook_global_table$NRM\n";
print "10. Allow writing into Global Address Book : $WHT$addrbook_global_writeable$NRM\n";
print "11. Allow listing of Global Address Book : $WHT$addrbook_global_listing$NRM\n";
print "\n";
print "R Return to Main Menu\n";
} elsif ( $menu == 10 ) {
print $WHT. "Language preferences\n" . $NRM;
print "1. Default Language : $WHT$squirrelmail_default_language$NRM\n";
print "2. Default Charset : $WHT$default_charset$NRM\n";
print "3. Enable lossy encoding : $WHT$lossy_encoding$NRM\n";
print "\n";
print "R Return to Main Menu\n";
}
if ( $config_use_color == 1 ) {
print "C Turn color off\n";
} else {
print "C Turn color on\n";
}
print "S Save data\n";
print "Q Quit\n";
print "\n";
print "Command >> " . $WHT;
$command = <STDIN>;
$command =~ s/[\n|\r]//g;
$command =~ tr/A-Z/a-z/;
print "$NRM\n";
# Read the commands they entered.
if ( $command eq "r" ) {
$menu = 0;
} elsif ( $command eq "s" ) {
save_data();
print "Press enter to continue...";
$tmp = <STDIN>;
$saved = 1;
} elsif ( ( $command eq "q" ) && ( $saved == 0 ) ) {
print "You have not saved your data.\n";
print "Save? [" . $WHT . "Y" . $NRM . "/n]: ";
$save = <STDIN>;
if ( ( $save =~ /^y/i ) || ( $save =~ /^\s*$/ ) ) {
save_data();
}
} elsif ( $command eq "c" ) {
if ( $config_use_color == 1 ) {
$config_use_color = 2;
$WHT = "";
$NRM = "";
} else {
$config_use_color = 1;
$WHT = "\x1B[1m";
$NRM = "\x1B[0m";
}
} elsif ( $command eq "d" && $menu == 0 ) {
set_defaults();
} else {
$saved = 0;
if ( $menu == 0 ) {
if ( ( $command > 0 ) && ( $command < 11 ) ) {
$menu = $command;
}
} elsif ( $menu == 1 ) {
if ( $command == 1 ) { $org_name = command1(); }
elsif ( $command == 2 ) { $org_logo = command2(); }
elsif ( $command == 3 ) { ($org_logo_width,$org_logo_height) = command3(); }
elsif ( $command == 4 ) { $org_title = command4(); }
elsif ( $command == 5 ) { $signout_page = command5(); }
elsif ( $command == 6 ) { $frame_top = command6(); }
elsif ( $command == 7 ) { $provider_uri = command7(); }
elsif ( $command == 8 ) { $provider_name = command8(); }
} elsif ( $menu == 2 ) {
if ( $command eq "a" ) { $show_imap_settings = 1; $show_smtp_settings = 0; }
elsif ( $command eq "b" ) { $show_imap_settings = 0; $show_smtp_settings = 1; }
elsif ( $command eq "h" ) { $show_imap_settings = 0; $show_smtp_settings = 0; }
elsif ( $command <= 3 ) {
if ( $command == 1 ) { $domain = command11(); }
elsif ( $command == 2 ) { $invert_time = command110(); }
elsif ( $command == 3 ) { $useSendmail = command14(); }
$show_imap_settings = 0; $show_smtp_settings = 0;
} elsif ( $show_imap_settings ) {
if ( $command == 4 ) { $imapServerAddress = command12(); }
elsif ( $command == 5 ) { $imapPort = command13(); }
elsif ( $command == 6 ) { $imap_auth_mech = command112a(); }
elsif ( $command == 7 ) { $use_imap_tls = command113("IMAP",$use_imap_tls); }
elsif ( $command == 8 ) { $imap_server_type = command19(); }
elsif ( $command == 9 ) { $optional_delimiter = command111(); }
} elsif ( $show_smtp_settings && lc($useSendmail) eq "true" ) {
if ( $command == 4 ) { $sendmail_path = command15(); }
elsif ( $command == 5 ) { $sendmail_args = command_sendmail_args(); }
elsif ( $command == 6 ) { $encode_header_key = command114(); }
} elsif ( $show_smtp_settings ) {
if ( $command == 4 ) { $smtpServerAddress = command16(); }
elsif ( $command == 5 ) { $smtpPort = command17(); }
elsif ( $command == 6 ) { $pop_before_smtp = command18a(); }
elsif ( $command == 7 ) { $smtp_auth_mech = command112b(); }
elsif ( $command == 8 ) { $use_smtp_tls = command113("SMTP",$use_smtp_tls); }
elsif ( $command == 9 ) { $encode_header_key = command114(); }
}
} elsif ( $menu == 3 ) {
if ( $command == 1 ) { $default_folder_prefix = command21(); }
elsif ( $command == 2 ) { $show_prefix_option = command22(); }
elsif ( $command == 3 ) { $trash_folder = command23a(); }
elsif ( $command == 4 ) { $sent_folder = command23b(); }
elsif ( $command == 5 ) { $draft_folder = command23c(); }
elsif ( $command == 6 ) { $default_move_to_trash = command24a(); }
elsif ( $command == 7 ) { $default_move_to_sent = command24b(); }
elsif ( $command == 8 ) { $default_save_as_draft = command24c(); }
elsif ( $command == 9 ) { $list_special_folders_first = command27(); }
elsif ( $command == 10 ) { $use_special_folder_color = command28(); }
elsif ( $command == 11 ) { $auto_expunge = command29(); }
elsif ( $command == 12 ) { $default_sub_of_inbox = command210(); }
elsif ( $command == 13 ) { $show_contain_subfolders_option = command211(); }
elsif ( $command == 14 ) { $default_unseen_notify = command212(); }
elsif ( $command == 15 ) { $default_unseen_type = command213(); }
elsif ( $command == 16 ) { $auto_create_special = command214(); }
elsif ( $command == 17 ) { $delete_folder = command215(); }
elsif ( $command == 18 ) { $noselect_fix_enable = command216(); }
} elsif ( $menu == 4 ) {
if ( $command == 1 ) { $data_dir = command31(); }
elsif ( $command == 2 ) { $attachment_dir = command32(); }
elsif ( $command == 3 ) { $dir_hash_level = command33(); }
elsif ( $command == 4 ) { $default_left_size = command34(); }
elsif ( $command == 5 ) { $force_username_lowercase = command35(); }
elsif ( $command == 6 ) { $default_use_priority = command36(); }
elsif ( $command == 7 ) { $hide_sm_attributions = command37(); }
elsif ( $command == 8 ) { $default_use_mdn = command38(); }
elsif ( $command == 9 ) { $edit_identity = command39(); }
elsif ( $command == 10 ) { $allow_thread_sort = command310(); }
elsif ( $command == 11 ) { $allow_server_sort = command311(); }
elsif ( $command == 12 ) { $allow_charset_search = command312(); }
elsif ( $command == 13 ) { $uid_support = command313(); }
elsif ( $command == 14 ) { $session_name = command314(); }
elsif ( $command == 15 ) { $config_location_base = command_config_location_base(); }
elsif ( $command == 16 ) { $only_secure_cookies = command316(); }
elsif ( $command == 17 ) { $disable_security_tokens = command317(); }
elsif ( $command == 18 ) { $check_referrer = command318(); }
} elsif ( $menu == 5 ) {
if ( $command == 1 ) { command41(); }
elsif ( $command == 2 ) { $theme_css = command42(); }
} elsif ( $menu == 6 ) {
if ( $command == 1 ) { command61(); }
elsif ( $command == 2 ) { command62(); }
elsif ( $command == 3 ) { $abook_global_file=command63(); }
elsif ( $command == 4 ) { command64(); }
elsif ( $command == 5 ) { command_abook_global_file_listing(); }
elsif ( $command == 6 ) { command_abook_file_line_length(); }
} elsif ( $menu == 7 ) {
if ( $command == 1 ) { $motd = command71(); }
} elsif ( $menu == 8 ) {
if ( $command =~ /^[0-9]+/ ) { @plugins = command81(); }
} elsif ( $menu == 9 ) {
if ( $command == 1 ) { $addrbook_dsn = command91(); }
elsif ( $command == 2 ) { $addrbook_table = command92(); }
elsif ( $command == 3 ) { $prefs_dsn = command93(); }
elsif ( $command == 4 ) { $prefs_table = command94(); }
elsif ( $command == 5 ) { $prefs_user_field = command95(); }
elsif ( $command == 6 ) { $prefs_key_field = command96(); }
elsif ( $command == 7 ) { $prefs_val_field = command97(); }
elsif ( $command == 8 ) { $addrbook_global_dsn = command98(); }
elsif ( $command == 9 ) { $addrbook_global_table = command99(); }
elsif ( $command == 10 ) { $addrbook_global_writeable = command910(); }
elsif ( $command == 11 ) { $addrbook_global_listing = command911(); }
} elsif ( $menu == 10 ) {
if ( $command == 1 ) { $squirrelmail_default_language = commandA1(); }
elsif ( $command == 2 ) { $default_charset = commandA2(); }
elsif ( $command == 3 ) { $lossy_encoding = commandA3(); }
}
}
}
# we exit here
print "\nExiting conf.pl.\n".
"You might want to test your configuration by browsing to\n".
"http://your-squirrelmail-location/src/configtest.php\n".
"Happy SquirrelMailing!\n\n";
####################################################################################
#### Organization preferences ####
# org_name
sub command1 {
print "We have tried to make the name SquirrelMail as transparent as\n";
print "possible. If you set up an organization name, most places where\n";
print "SquirrelMail would take credit will be credited to your organization.\n";
print "\n";
print "If your Organization Name includes a '\$', please precede it with a \\. \n";
print "Other '\$' will be considered the beginning of a variable that\n";
print "must be defined before the \$org_name is printed.\n";
print "\$version, for example, is included by default, and will print the\n";
print "string representing the current SquirrelMail version.\n";
print "\n";
print "[$WHT$org_name$NRM]: $WHT";
$new_org_name = <STDIN>;
if ( $new_org_name eq "\n" ) {
$new_org_name = $org_name;
} else {
$new_org_name =~ s/[\r|\n]//g;
$new_org_name =~ s/\"/"/g;
}
return $new_org_name;
}
# org_logo
sub command2 {
print "Your organization's logo is an image that will be displayed at\n";
print "different times throughout SquirrelMail. ";
print "\n";
print "Please be aware of the following: \n";
print " - Relative URLs are relative to the config dir\n";
print " to use the default logo, use ../images/sm_logo.png\n";
print " - To specify a logo defined outside the SquirrelMail source tree\n";
print " use the absolute URL the webserver would use to include the file\n";
print " e.g. http://example.com/images/mylogo.gif or /images/mylogo.jpg\n";
print "\n";
print "[$WHT$org_logo$NRM]: $WHT";
$new_org_logo = <STDIN>;
if ( $new_org_logo eq "\n" ) {
$new_org_logo = $org_logo;
} else {
$new_org_logo =~ s/[\r|\n]//g;
}
return $new_org_logo;
}
# org_logo_width
sub command3 {
print "Your organization's logo is an image that will be displayed at\n";
print "different times throughout SquirrelMail. Width\n";
print "and Height of your logo image. Use '0' to disable.\n";
print "\n";
print "Width: [$WHT$org_logo_width$NRM]: $WHT";
$new_org_logo_width = <STDIN>;
$new_org_logo_width =~ tr/0-9//cd; # only want digits!
if ( $new_org_logo_width eq '' ) {
$new_org_logo_width = $org_logo_width;
}
if ( $new_org_logo_width > 0 ) {
print "Height: [$WHT$org_logo_height$NRM]: $WHT";
$new_org_logo_height = <STDIN>;
$new_org_logo_height =~ tr/0-9//cd; # only want digits!
if( $new_org_logo_height eq '' ) {
$new_org_logo_height = $org_logo_height;
}
} else {
$new_org_logo_height = 0;
}
return ($new_org_logo_width, $new_org_logo_height);
}
# org_title
sub command4 {
print "A title is what is displayed at the top of the browser window in\n";
print "the titlebar. Usually this will end up looking something like:\n";
print "\"Netscape: $org_title\"\n";
print "\n";
print "If your Organization Title includes a '\$', please precede it with a \\. \n";
print "Other '\$' will be considered the beginning of a variable that\n";
print "must be defined before the \$org_title is printed.\n";
print "\$version, for example, is included by default, and will print the\n";
print "string representing the current SquirrelMail version.\n";
print "\n";
print "[$WHT$org_title$NRM]: $WHT";
$new_org_title = <STDIN>;
if ( $new_org_title eq "\n" ) {
$new_org_title = $org_title;
} else {
$new_org_title =~ s/[\r|\n]//g;
$new_org_title =~ s/\"/\'/g;
}
return $new_org_title;
}
# signout_page
sub command5 {
print "When users click the Sign Out button they will be logged out and\n";
print "then sent to signout_page. If signout_page is left empty,\n";
print "(hit space and then return) they will be taken, as normal,\n";
print "to the default and rather sparse SquirrelMail signout page.\n";
print "\n";
print "[$WHT$signout_page$NRM]: $WHT";
$new_signout_page = <STDIN>;
if ( $new_signout_page eq "\n" ) {
$new_signout_page = $signout_page;
} else {
$new_signout_page =~ s/[\r|\n]//g;
$new_signout_page =~ s/^\s+$//g;
}
return $new_signout_page;
}
# Default top frame
sub command6 {
print "SquirrelMail defaults to using the whole of the browser window.\n";
print "This allows you to keep it within a specified frame. The default\n";
print "is '_top'\n";
print "\n";
print "[$WHT$frame_top$NRM]: $WHT";
$new_frame_top = <STDIN>;
if ( $new_frame_top eq "\n" ) {
$new_frame_top = '_top';
} else {
$new_frame_top =~ s/[\r|\n]//g;
$new_frame_top =~ s/^\s+$//g;
}
return $new_frame_top;
}
# Default link to provider
sub command7 {
print "Here you can set the link on the right of the page.\n";
print "The default is 'http://squirrelmail.org/'\n";
print "\n";
print "[$WHT$provider_uri$NRM]: $WHT";
$new_provider_uri = <STDIN>;
if ( $new_provider_uri eq "\n" ) {
$new_provider_uri = 'http://squirrelmail.org/';
} else {
$new_provider_uri =~ s/[\r|\n]//g;
$new_provider_uri =~ s/^\s+$//g;
}
return $new_provider_uri;
}
sub command8 {
print "Here you can set the name of the link on the right of the page.\n";
print "The default is 'SquirrelMail'\n";
print "\n";
print "[$WHT$provider_name$NRM]: $WHT";
$new_provider_name = <STDIN>;
if ( $new_provider_name eq "\n" ) {
$new_provider_name = 'SquirrelMail';
} else {
$new_provider_name =~ s/[\r|\n]//g;
$new_provider_name =~ s/^\s+$//g;
$new_provider_name =~ s/\'/\\'/g;
}
return $new_provider_name;
}
####################################################################################
#### Server settings ####
# domain
sub command11 {
print "The domain name is the suffix at the end of all email addresses. If\n";
print "for example, your email address is jdoe\@example.com, then your domain\n";
print "would be example.com.\n";
print "\n";
print "[$WHT$domain$NRM]: $WHT";
$new_domain = <STDIN>;
if ( $new_domain eq "\n" ) {
$new_domain = $domain;
} else {
$new_domain =~ s/\s//g;
}
return $new_domain;
}
# imapServerAddress
sub command12 {
print "This is the hostname where your IMAP server can be contacted.\n";
print "[$WHT$imapServerAddress$NRM]: $WHT";
$new_imapServerAddress = <STDIN>;
if ( $new_imapServerAddress eq "\n" ) {
$new_imapServerAddress = $imapServerAddress;
} else {
$new_imapServerAddress =~ s/[\r|\n]//g;
}
return $new_imapServerAddress;
}
# imapPort
sub command13 {
print "This is the port that your IMAP server is on. Usually this is 143.\n";
print "[$WHT$imapPort$NRM]: $WHT";
$new_imapPort = <STDIN>;
if ( $new_imapPort eq "\n" ) {
$new_imapPort = $imapPort;
} else {
$new_imapPort =~ s/[\r|\n]//g;
}
return $new_imapPort;
}
# useSendmail
sub command14 {
print "You now need to choose the method that you will use for sending\n";
print "messages in SquirrelMail. You can either connect to an SMTP server\n";
print "or use sendmail directly.\n";
if ( lc($useSendmail) eq "true" ) {
$default_value = "1";
} else {
$default_value = "2";
}
print "\n";
print " 1. Sendmail\n";
print " 2. SMTP\n";
print "Your choice [1/2] [$WHT$default_value$NRM]: $WHT";
$use_sendmail = <STDIN>;
if ( ( $use_sendmail =~ /^1\n/i )
|| ( ( $use_sendmail =~ /^\n/ ) && ( $default_value eq "1" ) ) ) {
$useSendmail = "true";
} else {
$useSendmail = "false";
}
return $useSendmail;
}
# sendmail_path
sub command15 {
print "Specify where the sendmail executable is located. Usually /usr/sbin/sendmail\n";
print "[$WHT$sendmail_path$NRM]: $WHT";
$new_sendmail_path = <STDIN>;
if ( $new_sendmail_path eq "\n" ) {
$new_sendmail_path = $sendmail_path;
} else {
$new_sendmail_path =~ s/[\r|\n]//g;
}
return $new_sendmail_path;
}
# Extra sendmail arguments
sub command_sendmail_args {
print "Specify additional sendmail program arguments.\n";
print "\n";
print "Make sure that arguments are supported by your sendmail program. -f argument \n";
print "is added automatically by SquirrelMail scripts. Variable defaults to standard\n";
print "/usr/sbin/sendmail arguments. If you use qmail-inject, nbsmtp or any other \n";
print "sendmail wrapper, which does not support -i and -t arguments, set variable to\n";
print "empty string or use arguments suitable for your mailer.\n";
print "\n";
print "[$WHT$sendmail_args$NRM]: $WHT";
$new_sendmail_args = <STDIN>;
if ( $new_sendmail_args eq "\n" ) {
$new_sendmail_args = $sendmail_args;
} else {
# strip linefeeds and crs.
$new_sendmail_args =~ s/[\r\n]//g;
}
return trim($new_sendmail_args);
}
# smtpServerAddress
sub command16 {
print "This is the hostname of your SMTP server.\n";
print "[$WHT$smtpServerAddress$NRM]: $WHT";
$new_smtpServerAddress = <STDIN>;
if ( $new_smtpServerAddress eq "\n" ) {
$new_smtpServerAddress = $smtpServerAddress;
} else {
$new_smtpServerAddress =~ s/[\r|\n]//g;
}
return $new_smtpServerAddress;
}
# smtpPort
sub command17 {
print "This is the port to connect to for SMTP. Usually 25.\n";
print "[$WHT$smtpPort$NRM]: $WHT";
$new_smtpPort = <STDIN>;
if ( $new_smtpPort eq "\n" ) {
$new_smtpPort = $smtpPort;
} else {
$new_smtpPort =~ s/[\r|\n]//g;
}
return $new_smtpPort;
}
# authenticated server
sub command18 {
return;
# This sub disabled by tassium - it has been replaced with smtp_auth_mech
print "Do you wish to use an authenticated SMTP server? Your server must\n";
print "support this in order for SquirrelMail to work with it. We implemented\n";
print "it according to RFC 2554.\n";
$YesNo = 'n';
$YesNo = 'y' if ( lc($use_authenticated_smtp) eq "true" );
print "Use authenticated SMTP server (y/n) [$WHT$YesNo$NRM]: $WHT";
$new_use_authenticated_smtp = <STDIN>;
$new_use_authenticated_smtp =~ tr/yn//cd;
return "true" if ( $new_use_authenticated_smtp eq "y" );
return "false" if ( $new_use_authenticated_smtp eq "n" );
return $use_authenticated_smtp;
}
# pop before SMTP
sub command18a {
print "Do you wish to use POP3 before SMTP? Your server must\n";
print "support this in order for SquirrelMail to work with it.\n";
$YesNo = 'n';
$YesNo = 'y' if ( lc($pop_before_smtp) eq "true" );
print "Use pop before SMTP (y/n) [$WHT$YesNo$NRM]: $WHT";
$new_pop_before_smtp = <STDIN>;
$new_pop_before_smtp =~ tr/yn//cd;
if ( $new_pop_before_smtp eq "y" ) {
$new_pop_before_smtp = "true";
} elsif ( $new_pop_before_smtp eq "n" ) {
$new_pop_before_smtp = "false";
} else {
$new_pop_before_smtp = $pop_before_smtp;
}
# if using POP before SMTP, allow setting of custom POP server address
if ($new_pop_before_smtp eq "true") {
print "$NRM\nIf the address of the POP server is not the same as\n";
print "your SMTP server, you may specify it here. Leave blank (to\n";
print "clear this, enter only spaces) to use the same address as\n";
print "your SMTP server.\n";
print "POP before SMTP server address [$WHT$pop_before_smtp_host$NRM]: $WHT";
$new_pop_before_smtp_host = <STDIN>;
if ( $new_pop_before_smtp_host eq "\n" ) {
$new_pop_before_smtp_host = $pop_before_smtp_host;
} elsif ($new_pop_before_smtp_host =~ /^\s+$/) {
$new_pop_before_smtp_host = '';
} else {
$new_pop_before_smtp_host =~ s/[\r|\n]//g;
}
$pop_before_smtp_host = $new_pop_before_smtp_host;
}
return $new_pop_before_smtp;
}
# imap_server_type
sub command19 {
print "Each IMAP server has its own quirks. As much as we tried to stick\n";
print "to standards, it doesn't help much if the IMAP server doesn't follow\n";
print "the same principles. We have made some work-arounds for some of\n";
print "these servers. If you would like to use them, please select your\n";
print "IMAP server. If you do not wish to use these work-arounds, you can\n";
print "set this to \"other\", and none will be used.\n";
print $list_supported_imap_servers;
print " other = Not one of the above servers\n";
print "[$WHT$imap_server_type$NRM]: $WHT";
$new_imap_server_type = <STDIN>;
if ( $new_imap_server_type eq "\n" ) {
$new_imap_server_type = $imap_server_type;
} else {
$new_imap_server_type =~ s/[\r|\n]//g;
}
return $new_imap_server_type;
}
# invert_time
sub command110 {
print "Sometimes the date of messages sent is messed up (off by a few hours\n";
print "on some machines). Typically this happens if the system doesn't support\n";
print "tm_gmtoff. It will happen only if your time zone is \"negative\".\n";
print "This most often occurs on Solaris 7 machines in the United States.\n";
print "By default, this is off. It should be kept off unless problems surface\n";
print "about the time that messages are sent.\n";
print " no = Do NOT fix time -- almost always correct\n";
print " yes = Fix the time for this system\n";
$YesNo = 'n';
$YesNo = 'y' if ( lc($invert_time) eq "true" );
print "Fix the time for this system (y/n) [$WHT$YesNo$NRM]: $WHT";
$new_invert_time = <STDIN>;
$new_invert_time =~ tr/yn//cd;
return "true" if ( $new_invert_time eq "y" );
return "false" if ( $new_invert_time eq "n" );
return $invert_time;
}
sub command111 {
print "This is the delimiter that your IMAP server uses to distinguish between\n";
print "folders. For example, Cyrus uses '.' as the delimiter and a complete\n";
print "folder would look like 'INBOX.Friends.Bob', while UW uses '/' and would\n";
print "look like 'INBOX/Friends/Bob'. Normally this should be left at 'detect'\n";
print "but if you are sure you know what delimiter your server uses, you can\n";
print "specify it here.\n";
print "\nTo have it autodetect the delimiter, set it to 'detect'.\n\n";
print "[$WHT$optional_delimiter$NRM]: $WHT";
$new_optional_delimiter = <STDIN>;
if ( $new_optional_delimiter eq "\n" ) {
$new_optional_delimiter = $optional_delimiter;
} else {
$new_optional_delimiter =~ s/[\r|\n]//g;
}
return $new_optional_delimiter;
}
# IMAP authentication type
# Possible values: login, cram-md5, digest-md5
# Now offers to detect supported mechs, assuming server & port are set correctly
sub command112a {
if ($use_imap_tls =~ /^true\b/i) {
print "Auto-detection of login methods is unavailable when using TLS.\n";
} else {
print "If you have already set the hostname and port number, I can try to\n";
print "detect the mechanisms your IMAP server supports.\n";
print "I will try to detect CRAM-MD5 and DIGEST-MD5 support. I can't test\n";
print "for \"login\" without knowing a username and password.\n";
print "Auto-detecting is optional - you can safely say \"n\" here.\n";
print "\nTry to detect supported mechanisms? [y/N]: ";
$inval=<STDIN>;
chomp($inval);
if ($inval =~ /^y\b/i) {
# Yes, let's try to detect.
print "Trying to detect IMAP capabilities...\n";
my $host = $imapServerAddress . ':'. $imapPort;
print "CRAM-MD5:\t";
my $tmp = detect_auth_support('IMAP',$host,'CRAM-MD5');
if (defined($tmp)) {
if ($tmp eq 'YES') {
print "$WHT SUPPORTED$NRM\n";
} else {
print "$WHT NOT SUPPORTED$NRM\n";
}
} else {
print $WHT . " ERROR DETECTING$NRM\n";
}
print "DIGEST-MD5:\t";
$tmp = detect_auth_support('IMAP',$host,'DIGEST-MD5');
if (defined($tmp)) {
if ($tmp eq 'YES') {
print "$WHT SUPPORTED$NRM\n";
} else {
print "$WHT NOT SUPPORTED$NRM\n";
}
} else {
print $WHT . " ERROR DETECTING$NRM\n";
}
}
}
print "\nWhat authentication mechanism do you want to use for IMAP connections?\n\n";
print $WHT . "login" . $NRM . " - Plaintext. If you can do better, you probably should.\n";
print $WHT . "cram-md5" . $NRM . " - Slightly better than plaintext methods.\n";
print $WHT . "digest-md5" . $NRM . " - Privacy protection - better than cram-md5.\n";
print "\n*** YOUR IMAP SERVER MUST SUPPORT THE MECHANISM YOU CHOOSE HERE ***\n";
print "If you don't understand or are unsure, you probably want \"login\"\n\n";
print "login, cram-md5, or digest-md5 [$WHT$imap_auth_mech$NRM]: $WHT";
$inval=<STDIN>;
chomp($inval);
if ( ($inval =~ /^cram-md5\b/i) || ($inval =~ /^digest-md5\b/i) || ($inval =~ /^login\b/i)) {
return lc($inval);
} else {
# user entered garbage or default value so nothing needs to be set
return $imap_auth_mech;
}
}
# SMTP authentication type
# Possible choices: none, plain, cram-md5, digest-md5
sub command112b {
if ($use_smtp_tls =~ /^true\b/i) {
print "Auto-detection of login methods is unavailable when using TLS.\n";
} elsif (eval ("use IO::Socket; 1")) {
print "If you have already set the hostname and port number, I can try to\n";
print "automatically detect the mechanisms your SMTP server supports.\n";
print "Auto-detection is *optional* - you can safely say \"n\" here.\n";
print "\nTry to detect auth mechanisms? [y/N]: ";
$inval=<STDIN>;
chomp($inval);
if ($inval =~ /^y\b/i) {
# Yes, let's try to detect.
print "Trying to detect supported methods (SMTP)...\n";
# Special case!
# Check none by trying to relay to junk@microsoft.com
$host = $smtpServerAddress . ':' . $smtpPort;
my $sock = IO::Socket::INET->new($host);
print "Testing none:\t\t$WHT";
if (!defined($sock)) {
print " ERROR TESTING\n";
close $sock;
} else {
$got = <$sock>; # Discard greeting
print $sock "HELO $domain\r\n";
$got = <$sock>; # Discard
print $sock "MAIL FROM:<tester\@squirrelmail.org>\r\n";
$got = <$sock>; # Discard
print $sock "RCPT TO:<junk\@microsoft.com>\r\n";
$got = <$sock>; # This is the important line
if ($got =~ /^250\b/) { # SMTP will relay without auth
print "SUPPORTED$NRM\n";
} else {
print "NOT SUPPORTED$NRM\n";
}
print $sock "RSET\r\n";
print $sock "QUIT\r\n";
close $sock;
}
# Try login (SquirrelMail default)
print "Testing login:\t\t";
$tmp=detect_auth_support('SMTP',$host,'LOGIN');
if (defined($tmp)) {
if ($tmp eq 'YES') {
print $WHT . "SUPPORTED$NRM\n";
} else {
print $WHT . "NOT SUPPORTED$NRM\n";
}
} else {
print $WHT . "ERROR DETECTING$NRM\n";
}
# Try CRAM-MD5
print "Testing CRAM-MD5:\t";
$tmp=detect_auth_support('SMTP',$host,'CRAM-MD5');
if (defined($tmp)) {
if ($tmp eq 'YES') {
print $WHT . "SUPPORTED$NRM\n";
} else {
print $WHT . "NOT SUPPORTED$NRM\n";
}
} else {
print $WHT . "ERROR DETECTING$NRM\n";
}
print "Testing DIGEST-MD5:\t";
$tmp=detect_auth_support('SMTP',$host,'DIGEST-MD5');
if (defined($tmp)) {
if ($tmp eq 'YES') {
print $WHT . "SUPPORTED$NRM\n";
} else {
print $WHT . "NOT SUPPORTED$NRM\n";
}
} else {
print $WHT . "ERROR DETECTING$NRM\n";
}
}
}
print "\nWhat authentication mechanism do you want to use for SMTP connections?\n";
print $WHT . "none" . $NRM . " - Your SMTP server does not require authorization.\n";
print $WHT . "login" . $NRM . " - Plaintext. If you can do better, you probably should.\n";
print $WHT . "cram-md5" . $NRM . " - Slightly better than plaintext.\n";
print $WHT . "digest-md5" . $NRM . " - Privacy protection - better than cram-md5.\n";
print $WHT . "\n*** YOUR SMTP SERVER MUST SUPPORT THE MECHANISM YOU CHOOSE HERE ***\n" . $NRM;
print "If you don't understand or are unsure, you probably want \"none\"\n\n";
print "none, login, cram-md5, or digest-md5 [$WHT$smtp_auth_mech$NRM]: $WHT";
$inval=<STDIN>;
chomp($inval);
if ($inval =~ /^none\b/i) {
# SMTP doesn't necessarily require logins
$smtp_sitewide_user = '';
$smtp_sitewide_pass = '';
return "none";
}
if ( ($inval =~ /^cram-md5\b/i) || ($inval =~ /^digest-md5\b/i) ||
($inval =~ /^login\b/i)) {
command_smtp_sitewide_userpass($inval);
return lc($inval);
} elsif (trim($inval) eq '') {
command_smtp_sitewide_userpass($smtp_auth_mech);
return $smtp_auth_mech;
} else {
# user entered garbage
return $smtp_auth_mech;
}
}
sub command_smtp_sitewide_userpass($) {
# get first function argument
my $auth_mech = shift(@_);
my $default, $tmp;
$auth_mech = lc(trim($auth_mech));
if ($auth_mech eq 'none') {
return;
}
print "SMTP authentication uses IMAP username and password by default.\n";
print "\n";
print "Would you like to use other login and password for all SquirrelMail \n";
print "SMTP connections?";
if ($smtp_sitewide_user ne '') {
$default = 'y';
print " [Y/n]:";
} else {
$default = 'n';
print " [y/N]:";
}
$tmp=<STDIN>;
$tmp = trim($tmp);
if ($tmp eq '') {
$tmp = $default;
} else {
$tmp = lc($tmp);
}
if ($tmp eq 'n') {
$smtp_sitewide_user = '';
$smtp_sitewide_pass = '';
} elsif ($tmp eq 'y') {
print "Enter username [$smtp_sitewide_user]:";
my $new_user = <STDIN>;
$new_user = trim($new_user);
if ($new_user ne '') {
$smtp_sitewide_user = $new_user;
}
if ($smtp_sitewide_user ne '') {
print "If you don't enter any password, current sitewide password will be used.\n";
print "If you enter space, password will be set to empty string.\n";
print "Enter password:";
my $new_pass = <STDIN>;
if ($new_pass ne "\n") {
$smtp_sitewide_pass = trim($new_pass);
}
} else {
print "Invalid input. You must set username used for SMTP authentication.\n";
print "Click any key to continue\n";
$tmp = <STDIN>;
}
} else {
print "Invalid input\n";
print "Click any key to continue\n";
$tmp = <STDIN>;
}
}
# Sub adds information about SMTP authentication type to menu
sub display_smtp_sitewide_userpass() {
my $ret = '';
if ($smtp_auth_mech ne 'none') {
if ($smtp_sitewide_user ne '') {
$ret = ' (with custom username and password)';
} else {
$ret = ' (with IMAP username and password)';
}
}
return $ret;
}
# TLS
# This sub is reused for IMAP and SMTP
# Args: service name, default value
sub command113 {
my($default_val,$service,$inval);
$service=$_[0];
$default_val=$_[1];
print "TLS (Transport Layer Security) encrypts the traffic between server and client.\n";
print "If you're familiar with SSL, you get the idea.\n";
print "To use this feature, your " . $service . " server must offer TLS\n";
print "capability, plus PHP 4.3.x with OpenSSL support.\n";
print "Note that the 'STARTTLS' command is not supported; the server must\n";
print "have a dedicated port listening for TLS connections.\n";
print "\nIf your " . $service . " server is localhost, you can safely disable this.\n";
print "If it is remote, you may wish to seriously consider enabling this.\n";
print "Enable TLS (y/n) [$WHT";
if ($default_val eq "true") {
print "y";
} else {
print "n";
}
print "$NRM]: $WHT";
$inval=<STDIN>;
$inval =~ tr/yn//cd;
return "true" if ( $inval eq "y" );
return "false" if ( $inval eq "n" );
return $default_val;
}
# $encode_header_key
sub command114{
print "This encryption key allows the hiding of SquirrelMail Received:\n";
print "headers in outbound messages. SquirrelMail uses the encryption\n";
print "key to encode the username, remote address, and proxied address\n";
print "and then stores that encoded information in X-Squirrel-* headers.\n";
print "\n";
print "Warning: the encryption function used to accomplish this is not\n";
print "bulletproof. When used with a static encryption key as it is here,\n";
print "it provides only minimal security and the encoded user information\n";
print "in the X-Squirrel-* headers can be decoded quickly by a skilled\n";
print "attacker.\n";
print "\n";
print "When you need to inspect an email sent from your system with the\n";
print "X-Squirrel-* headers, you can decode the user information therein\n";
print "by using the decrypt_headers.php script found in the SquirrelMail\n";
print "contrib/ directory. You'll need the encryption key that you\n";
print "defined here when doing so.\n";
print "\n";
print "Enter encryption key: ";
$new_encode_header_key = <STDIN>;
if ( $new_encode_header_key eq "\n" ) {
$new_encode_header_key = $encode_header_key;
} else {
$new_encode_header_key =~ s/[\r\n]//g;
}
return $new_encode_header_key;
}
####################################################################################
#### MOTD ####
sub command71 {
print "\nYou can now create the welcome message that is displayed\n";
print "every time a user logs on. You can use HTML or just plain\n";
print
"text. If you do not wish to have one, just make it blank.\n\n(Type @ on a blank line to exit)\n";
$new_motd = "";
do {
print "] ";
$line = <STDIN>;
$line =~ s/[\r|\n]//g;
if ( $line ne "@" ) {
$line =~ s/ /\ \ /g;
$line =~ s/\t/\ \ \ \ /g;
$line =~ s/$/ /;
$line =~ s/\"/\\\"/g;
$new_motd = $new_motd . $line;
}
} while ( $line ne "@" );
return $new_motd;
}
####################################################################################
#### PLUGINS ####
sub command81 {
$command =~ s/[\s|\n|\r]*//g;
if ( $command > 0 ) {
$command = $command - 1;
if ( $command <= $#plugins ) {
@newplugins = ();
$ct = 0;
while ( $ct <= $#plugins ) {
if ( $ct != $command ) {
@newplugins = ( @newplugins, $plugins[$ct] );
}
$ct++;
}
@plugins = @newplugins;
} elsif ( $command <= $#plugins + $#unused_plugins + 1 ) {
$num = $command - $#plugins - 1;
@newplugins = @plugins;
$ct = 0;
while ( $ct <= $#unused_plugins ) {
if ( $ct == $num ) {
@newplugins = ( @newplugins, $unused_plugins[$ct] );
}
$ct++;
}
@plugins = @newplugins;
}
}
return @plugins;
}
####################################################################################
#### FOLDERS #####
# default_folder_prefix
sub command21 {
print "Some IMAP servers (UW, for example) store mail and folders in\n";
print "your user space in a separate subdirectory. This is where you\n";
print "specify what that directory is.\n";
print "\n";
print "EXAMPLE: mail/";
print "\n";
print "NOTE: If you use Cyrus, or some server that would not use this\n";
print " option, you must set this to 'none'.\n";
print "\n";
print "[$WHT$default_folder_prefix$NRM]: $WHT";
$new_default_folder_prefix = <STDIN>;
if ( $new_default_folder_prefix eq "\n" ) {
$new_default_folder_prefix = $default_folder_prefix;
} else {
$new_default_folder_prefix =~ s/[\r\n]//g;
}
if ( ( $new_default_folder_prefix =~ /^\s*$/ ) || ( $new_default_folder_prefix =~ m/^none$/i ) ) {
$new_default_folder_prefix = "";
} else {
# add the trailing delimiter only if we know what the server is.
if (($imap_server_type eq 'cyrus' and
$optional_delimiter eq 'detect') or
($imap_server_type eq 'courier' and
$optional_delimiter eq 'detect')) {
$new_default_folder_prefix =~ s/\.*$/\./;
} elsif ($imap_server_type eq 'uw' and
$optional_delimiter eq 'detect') {
$new_default_folder_prefix =~ s/\/*$/\//;
}
}
return $new_default_folder_prefix;
}
# Show Folder Prefix
sub command22 {
print "It is possible to set up the default folder prefix as a user\n";
print "specific option, where each user can specify what their mail\n";
print "folder is. If you set this to false, they will never see the\n";
print "option, but if it is true, this option will appear in the\n";
print "'options' section.\n";
print "\n";
print "NOTE: You set the default folder prefix in option '1' of this\n";
print " section. That will be the default if the user doesn't\n";
print " specify anything different.\n";
print "\n";
if ( lc($show_prefix_option) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "\n";
print "Show option (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = <STDIN>;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$show_prefix_option = "true";
} else {
$show_prefix_option = "false";
}
return $show_prefix_option;
}
# Trash Folder
sub command23a {
print "You can now specify where the default trash folder is located.\n";
print "On servers where you do not want this, you can set it to anything\n";
print "and set option 6 to false.\n";
print "\n";
print "This is relative to where the rest of your email is kept. You do\n";
print "not need to worry about their mail directory. If this folder\n";
print "would be ~/mail/trash on the filesystem, you only need to specify\n";
print "that this is 'trash', and be sure to put 'mail/' in option 1.\n";
print "\n";
print "[$WHT$trash_folder$NRM]: $WHT";
$new_trash_folder = <STDIN>;
if ( $new_trash_folder eq "\n" ) {
$new_trash_folder = $trash_folder;
} else {
if (check_imap_folder($new_trash_folder)) {
$new_trash_folder =~ s/[\r|\n]//g;
} else {
$new_trash_folder = $trash_folder;
}
}
return $new_trash_folder;
}
# Sent Folder
sub command23b {
print "This is where messages that are sent will be stored. SquirrelMail\n";
print "by default puts a copy of all outgoing messages in this folder.\n";
print "\n";
print "This is relative to where the rest of your email is kept. You do\n";
print "not need to worry about their mail directory. If this folder\n";
print "would be ~/mail/sent on the filesystem, you only need to specify\n";
print "that this is 'sent', and be sure to put 'mail/' in option 1.\n";
print "\n";
print "[$WHT$sent_folder$NRM]: $WHT";
$new_sent_folder = <STDIN>;
if ( $new_sent_folder eq "\n" ) {
$new_sent_folder = $sent_folder;
} else {
if (check_imap_folder($new_sent_folder)) {
$new_sent_folder =~ s/[\r|\n]//g;
} else {
$new_sent_folder = $sent_folder;
}
}
return $new_sent_folder;
}
# Draft Folder
sub command23c {
print "You can now specify where the default draft folder is located.\n";
print "On servers where you do not want this, you can set it to anything\n";
print "and set option 9 to false.\n";
print "\n";
print "This is relative to where the rest of your email is kept. You do\n";
print "not need to worry about their mail directory. If this folder\n";
print "would be ~/mail/drafts on the filesystem, you only need to specify\n";
print "that this is 'drafts', and be sure to put 'mail/' in option 1.\n";
print "\n";
print "[$WHT$draft_folder$NRM]: $WHT";
$new_draft_folder = <STDIN>;
if ( $new_draft_folder eq "\n" ) {
$new_draft_folder = $draft_folder;
} else {
if (check_imap_folder($new_draft_folder)) {
$new_draft_folder =~ s/[\r|\n]//g;
} else {
$new_draft_folder = $draft_folder;
}
}
return $new_draft_folder;
}
# default move to trash
sub command24a {
print "By default, should messages get moved to the trash folder? You\n";
print "can specify the default trash folder in option 3. If this is set\n";
print "to false, messages will get deleted immediately without moving\n";
print "to the trash folder.\n";
print "\n";
print "Trash folder is currently: $trash_folder\n";
print "\n";
if ( lc($default_move_to_trash) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "By default, move to trash (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = <STDIN>;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$default_move_to_trash = "true";
} else {
$default_move_to_trash = "false";
}
return $default_move_to_trash;
}
# default move to sent (save sent messages)
sub command24b {
print "By default, should copies of outgoing messages get saved in the\n";
print "sent folder? You can specify the default sent folder in option 4.\n";
print "If this is set to false, messages will get sent and no copy will\n";
print "be made.\n";
print "\n";
print "Sent folder is currently: $sent_folder\n";
print "\n";
if ( lc($default_move_to_sent) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "By default, save sent messages (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = <STDIN>;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$default_move_to_sent = "true";
} else {
$default_move_to_sent = "false";
}
return $default_move_to_sent;
}
# default save as draft
sub command24c {
print "By default, should the save to draft option be shown? You can\n";
print "specify the default drafts folder in option 5. If this is set\n";
print "to false, users will not be shown the save to draft option.\n";
print "\n";
print "Drafts folder is currently: $draft_folder\n";
print "\n";
if ( lc($default_save_as_draft) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "By default, save as draft (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = <STDIN>;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$default_save_as_draft = "true";
} else {
$default_save_as_draft = "false";
}
return $default_save_as_draft;
}
# List special folders first
sub command27 {
print "SquirrelMail has what we call 'special folders' that are not\n";
print "manipulated and viewed like normal folders. Some examples of\n";
print "these folders would be INBOX, Trash, Sent, etc. This option\n";
print "Simply asks if you want these folders listed first in the folder\n";
print "listing.\n";
print "\n";
if ( lc($list_special_folders_first) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "\n";
print "List first (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = <STDIN>;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$list_special_folders_first = "true";
} else {
$list_special_folders_first = "false";
}
return $list_special_folders_first;
}
# Show special folders color
sub command28 {
print "SquirrelMail has what we call 'special folders' that are not\n";
print "manipulated and viewed like normal folders. Some examples of\n";
print "these folders would be INBOX, Trash, Sent, etc. This option\n";
print "wants to know if we should display special folders in a\n";
print "color than the other folders.\n";
print "\n";
if ( lc($use_special_folder_color) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "\n";
print "Show color (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = <STDIN>;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$use_special_folder_color = "true";
} else {
$use_special_folder_color = "false";
}
return $use_special_folder_color;
}
# Auto expunge
sub command29 {
print "The way that IMAP handles deleting messages is as follows. You\n";
print "mark the message as deleted, and then to 'really' delete it, you\n";
print "expunge it. This option asks if you want to just have messages\n";
print "marked as deleted, or if you want SquirrelMail to expunge the \n";
print "messages too.\n";
print "\n";
if ( lc($auto_expunge) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Auto expunge (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = <STDIN>;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$auto_expunge = "true";
} else {
$auto_expunge = "false";
}
return $auto_expunge;
}
# Default sub of inbox
sub command210 {
print "Some IMAP servers (Cyrus) have all folders as subfolders of INBOX.\n";
print "This can cause some confusion in folder creation for users when\n";
print "they try to create folders and don't put it as a subfolder of INBOX\n";
print "and get permission errors. This option asks if you want folders\n";
print "to be subfolders of INBOX by default.\n";
print "\n";
if ( lc($default_sub_of_inbox) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Default sub of INBOX (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = <STDIN>;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$default_sub_of_inbox = "true";
} else {
$default_sub_of_inbox = "false";
}
return $default_sub_of_inbox;
}
# Show contain subfolder option
sub command211 {
print "Some IMAP servers (UW) make it so that there are two types of\n";
print "folders. Those that contain messages, and those that contain\n";
print "subfolders. If this is the case for your server, set this to\n";
print "true, and it will ask the user whether the folder they are\n";
print "creating contains subfolders or messages.\n";
print "\n";
if ( lc($show_contain_subfolders_option) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Show option (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = <STDIN>;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$show_contain_subfolders_option = "true";
} else {
$show_contain_subfolders_option = "false";
}
return $show_contain_subfolders_option;
}
# Default Unseen Notify
sub command212 {
print "This option specifies where the users will receive notification\n";
print "about unseen messages by default. This is of course an option that\n";
print "can be changed on a user level.\n";
print " 1 = No notification\n";
print " 2 = Only on the INBOX\n";
print " 3 = On all folders\n";
print "\n";
print "Which one should be default (1,2,3)? [$WHT$default_unseen_notify$NRM]: $WHT";
$new_show = <STDIN>;
if ( $new_show =~ /^[1|2|3]\n/i ) {
$default_unseen_notify = $new_show;
}
$default_unseen_notify =~ s/[\r|\n]//g;
return $default_unseen_notify;
}
# Default Unseen Type
sub command213 {
print "Here you can define the default way that unseen messages will be displayed\n";
print "to the user in the folder listing on the left side.\n";
print " 1 = Only unseen messages (4)\n";
print " 2 = Unseen and Total messages (4/27)\n";
print "\n";
print "Which one should be default (1,2)? [$WHT$default_unseen_type$NRM]: $WHT";
$new_show = <STDIN>;
if ( $new_show =~ /^[1|2]\n/i ) {
$default_unseen_type = $new_show;
}
$default_unseen_type =~ s/[\r|\n]//g;
return $default_unseen_type;
}
# Auto create special folders
sub command214 {
print "Would you like the Sent, Trash, and Drafts folders to be created\n";
print "automatically print for you when a user logs in? If the user\n";
print "accidentally deletes their special folders, this option will\n";
print "automatically create it again for them.\n";
print "\n";
if ( lc($auto_create_special) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Auto create special folders? (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = <STDIN>;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$auto_create_special = "true";
} else {
$auto_create_special = "false";
}
return $auto_create_special;
}
# Automatically delete folders
sub command215 {
if ( $imap_server_type eq "uw" ) {
print "UW IMAP servers will not allow folders containing";
print "mail to also contain folders.\n";
print "Deleting folders will bypass the trash folder and";
print "be immediately deleted\n\n";
print "If this is not the correct value for your server,\n";
print "please use option D on the Main Menu to configure your server correctly.\n\n";
print "Press any key to continue...\n";
$new_delete = <STDIN>;
$delete_folder = "true";
} else {
print "Should folders selected for deletion bypass the Trash folder?\n\n";
if ( lc($delete_folder) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Auto delete folders? (y/n) [$WHT$default_value$NRM]: $WHT";
$new_delete = <STDIN>;
if ( ( $new_delete =~ /^y\n/i ) || ( ( $new_delete =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$delete_folder = "true";
} else {
$delete_folder = "false";
}
}
return $delete_folder;
}
#noselect fix
sub command216 {
print "Some IMAP servers allow subfolders to exist even if the parent\n";
print "folders do not. This fixes some problems with the folder list\n";
print "when this is the case, causing the /NoSelect folders to be displayed\n";
print "\n";
if ( lc($noselect_fix_enable) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "enable noselect fix? (y/n) [$WHT$noselect_fix_enable$NRM]: $WHT";
$noselect_fix_enable = <STDIN>;
if ( ( $noselect_fix_enable =~ /^y\n/i ) || ( ( $noselect_fix_enable =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$noselect_fix_enable = "true";
} else {
$noselect_fix_enable = "false";
}
return $noselect_fix_enable;
}
####################################################################################
#### GENERAL OPTIONS ####
# Data directory
sub command31 {
print "Specify the location for your data directory.\n";
print "The path name can be absolute or relative (to the config directory).\n";
print "You probably need to create this directory yourself. Here are two examples:\n";
print " Absolute: /var/local/squirrelmail/data/\n";
print " Relative: ../data/\n";
print "Relative paths to directories outside of the SquirrelMail distribution\n";
print "will be converted to their absolute path equivalents in config.php.\n\n";
print "Note: There are potential security risks with having a writable directory\n";
print "under the web server's root directory (ex: /home/httpd/html).\n";
print "For this reason, it is recommended to put the data directory\n";
print "in an alternate location of your choice. \n";
print "\n";
print "[$WHT$data_dir$NRM]: $WHT";
$new_data_dir = <STDIN>;
if ( $new_data_dir eq "\n" ) {
$new_data_dir = $data_dir;
} else {
$new_data_dir =~ s/[\r|\n]//g;
}
if ( $new_data_dir =~ /^\s*$/ ) {
$new_data_dir = "";
} else {
$new_data_dir =~ s/\/*$//g;
$new_data_dir =~ s/$/\//g;
}
return $new_data_dir;
}
# Attachment directory
sub command32 {
print "Path to directory used for storing attachments while a mail is\n";
print "being sent. The path name can be absolute or relative (to the config directory).\n";
print "It doesn't matter. Here are two examples:\n";
print " Absolute: /var/spool/squirrelmail/attach/\n";
print " Relative: ../attach/\n";
print "Relative paths to directories outside of the SquirrelMail distribution\n";
print "will be converted to their absolute path equivalents in config.php.\n\n";
print "Note: There are a few security considerations regarding this\n";
print "directory:\n";
print " 1. It should have the permission 733 (rwx-wx-wx) to make it\n";
print " impossible for a random person with access to the webserver\n";
print " to list files in this directory. Confidential data might\n";
print " be laying around in there.\n";
print " Depending on your user:group assignments, 730 (rwx-wx---)\n";
print " may be possible, and more secure (e.g. root:apache)\n";
print " 2. Since the webserver is not able to list the files in the\n";
print " content is also impossible for the webserver to delete files\n";
print " lying around there for too long.\n";
print " 3. It should probably be another directory than the data\n";
print " directory specified in option 3.\n";
print "\n";
print "[$WHT$attachment_dir$NRM]: $WHT";
$new_attachment_dir = <STDIN>;
if ( $new_attachment_dir eq "\n" ) {
$new_attachment_dir = $attachment_dir;
} else {
$new_attachment_dir =~ s/[\r|\n]//g;
}
if ( $new_attachment_dir =~ /^\s*$/ ) {
$new_attachment_dir = "";
} else {
$new_attachment_dir =~ s/\/*$//g;
$new_attachment_dir =~ s/$/\//g;
}
return $new_attachment_dir;
}
sub command33 {
print "The directory hash level setting allows you to configure the level\n";
print "of hashing that Squirremail employs in your data and attachment\n";
print "directories. This value must be an integer ranging from 0 to 4.\n";
print "When this value is set to 0, Squirrelmail will simply store all\n";
print "files as normal in the data and attachment directories. However,\n";
print "when set to a value from 1 to 4, a simple hashing scheme will be\n";
print "used to organize the files in this directory. In short, the crc32\n";
print "value for a username will be computed. Then, up to the first 4\n";
print "digits of the hash, as set by this configuration value, will be\n";
print "used to directory hash the files for that user in the data and\n";
print "attachment directory. This allows for better performance on\n";
print "servers with larger numbers of users.\n";
print "\n";
print "[$WHT$dir_hash_level$NRM]: $WHT";
$new_dir_hash_level = <STDIN>;
if ( $new_dir_hash_level eq "\n" ) {
$new_dir_hash_level = $dir_hash_level;
} else {
$new_dir_hash_level =~ s/[\r|\n]//g;
}
if ( ( int($new_dir_hash_level) < 0 )
|| ( int($new_dir_hash_level) > 4 )
|| !( int($new_dir_hash_level) eq $new_dir_hash_level ) ) {
print "Invalid Directory Hash Level.\n";
print "Value must be an integer ranging from 0 to 4\n";
print "Hit enter to continue.\n";
$enter_key = <STDIN>;
$new_dir_hash_level = $dir_hash_level;
}
return $new_dir_hash_level;
}
sub command34 {
print "This is the default size (in pixels) of the left folder list.\n";
print "Default is 150, but you can set it to whatever you wish. This\n";
print "is a user preference, so this will only show up as their default.\n";
print "\n";
print "[$WHT$default_left_size$NRM]: $WHT";
$new_default_left_size = <STDIN>;
if ( $new_default_left_size eq "\n" ) {
$new_default_left_size = $default_left_size;
} else {
$new_default_left_size =~ s/[\r|\n]//g;
}
return $new_default_left_size;
}
sub command35 {
print "Some IMAP servers only have lowercase letters in the usernames\n";
print "but they still allow people with uppercase to log in. This\n";
print "causes a problem with the user's preference files. This option\n";
print "transparently changes all usernames to lowercase.";
print "\n";
if ( lc($force_username_lowercase) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Convert usernames to lowercase (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = <STDIN>;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
return "true";
}
return "false";
}
sub command36 {
print "";
print "\n";
if ( lc($default_use_priority) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Allow users to specify priority of outgoing mail (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = <STDIN>;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
return "true";
}
return "false";
}
sub command37 {
print "";
print "\n";
if ( lc($default_hide_attribution) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Hide SM attributions (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = <STDIN>;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
return "true";
}
return "false";
}
sub command38 {
print "";
print "\n";
if ( lc($default_use_mdn) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Enable support for read/delivery receipt support (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = <STDIN>;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
return "true";
}
return "false";
}
sub command39 {
print "In loosely managed environments, you may want to allow users\n";
print "to edit their full name and email address. In strictly managed\n";
print "environments, you may want to force users to use the name\n";
print "and email address assigned to them.\n";
print "\n";
print "'y' - allow a user to edit their full name and email address,\n";
print "'n' - users must use the assigned values.\n";
print "\n";
if ( lc($edit_identity) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Allow editing of user's identity? (y/n) [$WHT$default_value$NRM]: $WHT";
$new_edit = <STDIN>;
if ( ( $new_edit =~ /^y\n/i ) || ( ( $new_edit =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$edit_identity = "true";
$edit_name = "true";
$hide_auth_header = "false";
} else {
$edit_identity = "false";
$edit_name = command39a();
$hide_auth_header = command39b();
}
return $edit_identity;
}
sub command39a {
print $NRM;
print "\nAs a follow-up, this option allows you to choose if the user\n";
print "can edit their full name even when you don't want them to\n";
print "change their username\n";
print "\n";
if ( lc($edit_name) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Allow editing of the users full name? (y/n) [$WHT$default_value$NRM]: $WHT";
$new_edit = <STDIN>;
if ( ( $new_edit =~ /^y\n/i ) || ( ( $new_edit =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$edit_name = "true";
} else {
$edit_name = "false";
}
return $edit_name;
}
sub command39b {
print $NRM;
print "\nSquirrelMail adds username information to every outgoing\n";
print "email in order to prevent possible sender forging when\n";
print "users are allowed to change their email and/or full name.\n";
print "\n";
print "You can remove user information from this header (y) if you\n";
print "think that it violates privacy or security.\n";
print "\n";
print "Note: SquirrelMail will refuse to remove that information\n";
print "from the email headers if users are allowed to change their\n";
print "identities, regardless of what you have set here.\n";
print "\n";
print "Note: If you have defined a header encryption key in your SMTP\n";
print "or Sendmail settings (see the \"Server Settings\" option page),\n";
print "this setting is ignored because all user information in outgoing\n";
print "messages is encoded.\n";
print "\n";
if ( lc($hide_auth_header) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Remove username from email headers? (y/n) [$WHT$default_value$NRM]: $WHT";
$new_header = <STDIN>;
if ( ( $new_header =~ /^y\n/i ) || ( ( $new_header =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$hide_auth_header = "true";
} else {
$hide_auth_header = "false";
}
return $edit_name;
}
sub command310 {
print "This option allows you to choose if users can use thread sorting.\n";
print "Your IMAP server must support the THREAD command for this to work.\n";
print "\n";
if ( lc($allow_thread_sort) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Allow server side thread sorting? (y/n) [$WHT$default_value$NRM]: $WHT";
$allow_thread_sort = <STDIN>;
if ( ( $allow_thread_sort =~ /^y\n/i ) || ( ( $allow_thread_sort =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$allow_thread_sort = "true";
} else {
$allow_thread_sort = "false";
}
return $allow_thread_sort;
}
sub command311 {
print "This option allows you to choose if SM uses server-side sorting\n";
print "Your IMAP server must support the SORT command for this to work\n";
print "\n";
if ( lc($allow_server_sort) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Allow server-side sorting? (y/n) [$WHT$default_value$NRM]: $WHT";
$allow_server_sort = <STDIN>;
if ( ( $allow_server_sort =~ /^y\n/i ) || ( ( $allow_server_sort =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$allow_server_sort = "true";
} else {
$allow_server_sort = "false";
}
return $allow_server_sort;
}
sub command312 {
print "This option allows you to choose if SM uses charset search\n";
print "Your IMAP server must support the SEARCH CHARSET command for this to work\n";
print "\n";
if ( lc($allow_charset_search) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Allow charset searching? (y/n) [$WHT$default_value$NRM]: $WHT";
$allow_charset_search = <STDIN>;
if ( ( $allow_charset_search =~ /^y\n/i ) || ( ( $allow_charset_search =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$allow_charset_search = "true";
} else {
$allow_charset_search = "false";
}
return $allow_charset_search;
}
sub command313 {
print "This option allows you to enable unique identifier (UID) support.\n";
print "\n";
if ( lc($uid_support) eq "true" ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Enable Unique identifier (UID) support? (y/n) [$WHT$default_value$NRM]: $WHT";
$uid_support = <STDIN>;
if ( ( $uid_support =~ /^y\n/i ) || ( ( $uid_support =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$uid_support = "true";
} else {
$uid_support = "false";
}
return $uid_support;
}
sub command314 {
print "This option allows you to change the name of the PHP session used\n";
print "by SquirrelMail. Unless you know what you are doing, you probably\n";
print "don't need or want to change this from the default of SQMSESSID.\n";
print "[$WHT$session_name$NRM]: $WHT";
$new_session_name = <STDIN>;
chomp($new_session_name);
if ( $new_session_name eq "" ) {
$new_session_name = $session_name;
}
return $new_session_name;
}
# set the location base for redirects (since 1.4.8)
sub command_config_location_base {
print "Here you can set the base part of the SquirrelMail URL.\n";
print "It is normally autodetected but if that fails, use this\n";
print "option to override.\n";
print "It should contain only the protocol and hostname/port parts\n";
print "of the URL; the full path will be appended automatically.\n\n";
print "Examples:\nhttp://webmail.example.org\nhttp://webmail.example.com:8080\nhttps://webmail.example.com:6691\n\n";
print "Do not add any path elements.\n";
print "URL base? [" .$WHT."autodetect$NRM]: $WHT";
$new_config_location_base = <STDIN>;
chomp($new_config_location_base);
$config_location_base = $new_config_location_base;
return $config_location_base;
}
# only_secure_cookies (since 1.4.16)
sub command316 {
print "This option allows you to specify that if a user session is initiated\n";
print "under a secure (HTTPS, SSL-encrypted) connection, the cookies given to\n";
print "the browser will ONLY be transmitted via a secure connection henceforth.\n\n";
print "Generally this is a Good Thing, and should NOT be disabled. However,\n";
print "if you intend to use the Secure Login or Show SSL Link plugins to\n";
print "encrypt the user login, but not the rest of the SquirrelMail session,\n";
print "this can be turned off. Think twice before doing so.\n";
print "\n";
if ( lc($only_secure_cookies) eq 'true' ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Transmit cookies only on secure connection when available? (y/n) [$WHT$default_value$NRM]: $WHT";
$only_secure_cookies = <STDIN>;
if ( ( $only_secure_cookies =~ /^y\n/i ) || ( ( $only_secure_cookies =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$only_secure_cookies = 'true';
} else {
$only_secure_cookies = 'false';
}
return $only_secure_cookies;
}
# disable_security_tokens (since 1.4.20RC1)
sub command317 {
print "This option allows you to turn off the security checks in the forms\n";
print "that SquirrelMail generates. It is NOT RECOMMENDED that you disable\n";
print "this feature - otherwise, your users may be exposed to phishing and\n";
print "other attacks.\n";
print "Unless you know what you are doing, you should leave this set to \"NO\".\n";
print "\n";
if ( lc($disable_security_tokens) eq 'true' ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Disable secure forms? (y/n) [$WHT$default_value$NRM]: $WHT";
$disable_security_tokens = <STDIN>;
if ( ( $disable_security_tokens =~ /^y\n/i ) || ( ( $disable_security_tokens =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$disable_security_tokens = 'true';
} else {
$disable_security_tokens = 'false';
}
return $disable_security_tokens;
}
# check_referrer (since 1.4.20RC1)
sub command318 {
print "This option allows you to enable referal checks for all page requests\n";
print "made to SquirrelMail. This can help ensure that page requests came\n";
print "from the same server and not from an attacker's site (usually the\n";
print "result of a XSS or phishing attack). To enable referal checking,\n";
print "this setting can be set to the domain where your SquirrelMail is\n";
print "being hosted (usually the same as the Domain setting under Server\n";
print "Settings). For example, it could be \"example.com\", or if you\n";
print "use a plugin (such as Login Manager) to host SquirrelMail on more\n";
print "than one domain, you can set this to \"###DOMAIN###\" to tell it\n";
print "to use the current domain.\n";
print "\n";
print "However, in some cases (where proxy servers are in use, etc.), the\n";
print "domain might be different.\n";
print "\n";
print "NOTE that referal checks are not foolproof - they can be spoofed by\n";
print "browsers, and some browsers intentionally don't send referal\n";
print "information (in which case, the check is silently bypassed)\n";
print "\n";
print "Referal requirement? [$WHT$check_referrer$NRM]: $WHT";
$new_check_referrer = <STDIN>;
chomp($new_check_referrer);
$check_referrer = $new_check_referrer;
return $check_referrer;
}
####################################################################################
#### THEMES ####
sub command41 {
print "\nDefine the themes that you wish to use. If you have added ";
print "a theme of your own, just follow the instructions (?) about how to add ";
print "them. You can also change the default theme.\n";
print "[theme] command (?=help) > ";
$input = <STDIN>;
$input =~ s/[\r|\n]//g;
while ( $input ne "d" ) {
if ( $input =~ /^\s*l\s*/i ) {
$count = 0;
while ( $count <= $#theme_name ) {
if ( $count == $theme_default ) {
print " *";
} else {
print " ";
}
if ( $count < 10 ) {
print " ";
}
$name = $theme_name[$count];
$num_spaces = 35 - length($name);
for ( $i = 0 ; $i < $num_spaces ; $i++ ) {
$name = $name . " ";
}
print " $count. $name";
print "($theme_path[$count])\n";
$count++;
}
} elsif ( $input =~ /^\s*m\s*[0-9]+/i ) {
$old_def = $theme_default;
$theme_default = $input;
$theme_default =~ s/^\s*m\s*//;
if ( ( $theme_default > $#theme_name ) || ( $theme_default < 0 ) ) {
print "Cannot set default theme to $theme_default. That theme does not exist.\n";
$theme_default = $old_def;
}
} elsif ( $input =~ /^\s*\+/ ) {
print "What is the name of this theme: ";
$name = <STDIN>;
$name =~ s/[\r|\n]//g;
$theme_name[ $#theme_name + 1 ] = $name;
print "Be sure to put ../themes/ before the filename.\n";
print "What file is this stored in (ex: ../themes/default_theme.php): ";
$name = <STDIN>;
$name =~ s/[\r|\n]//g;
$theme_path[ $#theme_path + 1 ] = $name;
} elsif ( $input =~ /^\s*-\s*[0-9]?/ ) {
if ( $input =~ /[0-9]+\s*$/ ) {
$rem_num = $input;
$rem_num =~ s/^\s*-\s*//g;
$rem_num =~ s/\s*$//;
} else {
$rem_num = $#theme_name;
}
if ( $rem_num == $theme_default ) {
print "You cannot remove the default theme!\n";
} else {
$count = 0;
@new_theme_name = ();
@new_theme_path = ();
while ( $count <= $#theme_name ) {
if ( $count != $rem_num ) {
@new_theme_name = ( @new_theme_name, $theme_name[$count] );
@new_theme_path = ( @new_theme_path, $theme_path[$count] );
}
$count++;
}
@theme_name = @new_theme_name;
@theme_path = @new_theme_path;
if ( $theme_default > $rem_num ) {
$theme_default--;
}
}
} elsif ( $input =~ /^\s*t\s*/i ) {
print "\nStarting detection...\n\n";
opendir( DIR, "../themes" );
@files = grep { /\.php$/i } sort(readdir(DIR));
$cnt = 0;
while ( $cnt <= $#files ) {
$filename = "../themes/" . $files[$cnt];
if ( $filename ne "../themes/index.php" ) {
$found = 0;
for ( $x = 0 ; $x <= $#theme_path ; $x++ ) {
if ( $theme_path[$x] eq $filename ) {
$found = 1;
}
}
if ( $found != 1 ) {
print "** Found theme: $filename\n";
$def = $files[$cnt];
$def =~ s/_/ /g;
$def =~ s/\.php//g;
$def = lc($def);
#$def =~ s/(^\w+)/ucfirst $1/eg;
#$def =~ s/(\s+)(\w+)/$1 . ucfirst $2/eg;
$def =~ s/(^\w+)|(\s+)(\w+)/ucfirst $1 . $2 . ucfirst $3/eg;
print " What is its name? [$def]: ";
$nm = <STDIN>;
$nm =~ s/^\s+|\s+$|[\n|\r]//g;
if ( $nm eq '' ) { $nm = $def; }
$theme_name[ $#theme_name + 1 ] = $nm;
$theme_path[ $#theme_path + 1 ] = $filename;
}
}
$cnt++;
}
print "\n";
for ( $cnt = 0 ; $cnt <= $#theme_path ; $cnt++ ) {
$filename = $theme_path[$cnt];
if ( !( -e $filename ) ) {
print " Removing $filename (file not found)\n";
$offset = 0;
@new_theme_name = ();
@new_theme_path = ();
for ( $x = 0 ; $x < $#theme_path ; $x++ ) {
if ( $theme_path[$x] eq $filename ) {
$offset = 1;
}
if ( $offset == 1 ) {
$new_theme_name[$x] = $theme_name[ $x + 1 ];
$new_theme_path[$x] = $theme_path[ $x + 1 ];
} else {
$new_theme_name[$x] = $theme_name[$x];
$new_theme_path[$x] = $theme_path[$x];
}
}
@theme_name = @new_theme_name;
@theme_path = @new_theme_path;
}
}
print "\nDetection complete!\n\n";
closedir DIR;
} elsif ( $input =~ /^\s*\?\s*/ ) {
print ".-------------------------.\n";
print "| t (detect themes) |\n";
print "| + (add theme) |\n";
print "| - N (remove theme) |\n";
print "| m N (mark default) |\n";
print "| l (list themes) |\n";
print "| d (done) |\n";
print "`-------------------------'\n";
}
print "[theme] command (?=help) > ";
$input = <STDIN>;
$input =~ s/[\r|\n]//g;
}
}
# Theme - CSS file
sub command42 {
print "You may specify a cascading style-sheet (CSS) file to be included\n";
print "on each html page generated by SquirrelMail. The CSS file is useful\n";
print "for specifying a site-wide font. If you're not familiar with CSS\n";
print "files, leave this blank.\n";
print "\n";
print "To clear out an existing value, just type a space for the input.\n";
print "\n";
print "Please be aware of the following: \n";
print " - Relative URLs are relative to the config dir\n";
print " to use the themes directory, use ../themes/css/newdefault.css\n";
print " - To specify a css file defined outside the SquirrelMail source tree\n";
print " use the absolute URL the webserver would use to include the file\n";
print " e.g. http://example.com/css/mystyle.css or /css/mystyle.css\n";
print "\n";
print "[$WHT$theme_css$NRM]: $WHT";
$new_theme_css = <STDIN>;
if ( $new_theme_css eq "\n" ) {
$new_theme_css = $theme_css;
} else {
$new_theme_css =~ s/[\r|\n]//g;
}
$new_theme_css =~ s/^\s*//;
return $new_theme_css;
}
####################################################################################
#### Address books ####
# LDAP
sub command61 {
print "You can now define different LDAP servers.\n";
print "Please ensure proper permissions for config.php when including\n";
print "sensitive passwords.\n\n";
print "[ldap] command (?=help) > ";
$input = <STDIN>;
$input =~ s/[\r|\n]//g;
while ( $input ne "d" ) {
if ( $input =~ /^\s*l\s*/i ) {
$count = 0;
while ( $count <= $#ldap_host ) {
print "$count. $ldap_host[$count]\n";
print " base: $ldap_base[$count]\n";
if ( $ldap_charset[$count] ) {
print " charset: $ldap_charset[$count]\n";
}
if ( $ldap_port[$count] ) {
print " port: $ldap_port[$count]\n";
}
if ( $ldap_name[$count] ) {
print " name: $ldap_name[$count]\n";
}
if ( $ldap_maxrows[$count] ) {
print " maxrows: $ldap_maxrows[$count]\n";
}
if ( $ldap_binddn[$count] ) {
print " binddn: $ldap_binddn[$count]\n";
if ( $ldap_bindpw[$count] ) {
print " bindpw: $ldap_bindpw[$count]\n";
}
}
if ( $ldap_protocol[$count] ) {
print " protocol: $ldap_protocol[$count]\n";
}
print "\n";
$count++;
}
} elsif ( $input =~ /^\s*\+/ ) {
$sub = $#ldap_host + 1;
print "First, we need to have the hostname or the IP address where\n";
print "this LDAP server resides. Example: ldap.bigfoot.com\n";
print "\n";
print "You can use any URI compatible with your LDAP library. ldaps\n";
print "and ldapi URIs can be used to create secure LDAP connections.\n";
print "hostname: ";
$name = <STDIN>;
$name =~ s/[\r|\n]//g;
$ldap_host[$sub] = $name;
print "\n";
print "Next, we need the server root (base dn). For this, an empty\n";
print "string is allowed.\n";
print "Example: ou=member_directory,o=netcenter.com\n";
print "base: ";
$name = <STDIN>;
$name =~ s/[\r|\n]//g;
$ldap_base[$sub] = $name;
print "\n";
print "This is the TCP/IP port number for the LDAP server. Default\n";
print "port is 389. This is optional. Press ENTER for default.\n";
print "port: ";
$name = <STDIN>;
$name =~ s/[\r|\n]//g;
$ldap_port[$sub] = $name;
print "\n";
print "This is the charset for the server. Default is utf-8. This\n";
print "is also optional. Press ENTER for default.\n";
print "charset: ";
$name = <STDIN>;
$name =~ s/[\r|\n]//g;
$ldap_charset[$sub] = $name;
print "\n";
print "This is the name for the server, used to tag the results of\n";
print "the search. Default it \"LDAP: hostname\". Press ENTER for default\n";
print "name: ";
$name = <STDIN>;
$name =~ s/[\r|\n]//g;
$ldap_name[$sub] = $name;
print "\n";
print "You can specify the maximum number of rows in the search result.\n";
print "Default is unlimited. Press ENTER for default.\n";
print "maxrows: ";
$name = <STDIN>;
$name =~ s/[\r|\n]//g;
$ldap_maxrows[$sub] = $name;
print "\n";
print "If your LDAP server does not like anonymous logins, you can specify bind DN.\n";
print "Default is none, anonymous bind. Press ENTER for default.\n";
print "binddn: ";
$name = <STDIN>;
$name =~ s/[\r|\n]//g;
$ldap_binddn[$sub] = $name;
print "\n";
if ( $ldap_binddn[$sub] ne '' ) {
print "Now, please specify password for that DN.\n";
print "bindpw: ";
$name = <STDIN>;
$name =~ s/[\r|\n]//g;
$ldap_bindpw[$sub] = $name;
print "\n";
}
print "You can specify bind protocol version here.\n";
print "Default protocol version depends on your php ldap settings.\n";
print "Press ENTER for default.\n";
print "protocol: ";
$name = <STDIN>;
$name =~ s/[\r|\n]//g;
$ldap_protocol[$sub] = $name;
print "\n";
} elsif ( $input =~ /^\s*-\s*[0-9]?/ ) {
if ( $input =~ /[0-9]+\s*$/ ) {
$rem_num = $input;
$rem_num =~ s/^\s*-\s*//g;
$rem_num =~ s/\s*$//;
} else {
$rem_num = $#ldap_host;
}
$count = 0;
@new_ldap_host = ();
@new_ldap_base = ();
@new_ldap_port = ();
@new_ldap_name = ();
@new_ldap_charset = ();
@new_ldap_maxrows = ();
@new_ldap_bindpw = ();
@new_ldap_binddn = ();
@new_ldap_protocol = ();
while ( $count <= $#ldap_host ) {
if ( $count != $rem_num ) {
@new_ldap_host = ( @new_ldap_host, $ldap_host[$count] );
@new_ldap_base = ( @new_ldap_base, $ldap_base[$count] );
@new_ldap_port = ( @new_ldap_port, $ldap_port[$count] );
@new_ldap_name = ( @new_ldap_name, $ldap_name[$count] );
@new_ldap_charset = ( @new_ldap_charset, $ldap_charset[$count] );
@new_ldap_maxrows = ( @new_ldap_maxrows, $ldap_maxrows[$count] );
@new_ldap_binddn = ( @new_ldap_binddn, $ldap_binddn[$count] );
@new_ldap_bindpw = ( @new_ldap_bindpw, $ldap_bindpw[$count] );
@new_ldap_protocol = ( @new_ldap_protocol, $ldap_protocol[$count] );
}
$count++;
}
@ldap_host = @new_ldap_host;
@ldap_base = @new_ldap_base;
@ldap_port = @new_ldap_port;
@ldap_name = @new_ldap_name;
@ldap_charset = @new_ldap_charset;
@ldap_maxrows = @new_ldap_maxrows;
@ldap_binddn = @new_ldap_binddn;
@ldap_bindpw = @new_ldap_bindpw;
@ldap_protocol = @new_ldap_protocol;
} elsif ( $input =~ /^\s*\?\s*/ ) {
print ".-------------------------.\n";
print "| + (add host) |\n";
print "| - N (remove host) |\n";
print "| l (list hosts) |\n";
print "| d (done) |\n";
print "`-------------------------'\n";
}
print "[ldap] command (?=help) > ";
$input = <STDIN>;
$input =~ s/[\r|\n]//g;
}
}
# Javascript or html address book
sub command62 {
print "Some of our developers have come up with very good javascript interface\n";
print "for searching through address books, however, our original goals said\n";
print "that we would be 100% HTML. In order to make it possible to use their\n";
print "interface, and yet stick with our goals, we have also written a plain\n";
print "HTML version of the search. Here, you can choose which version to use.\n";
print "\n";
print "This is just the default value. It is also a user option that each\n";
print "user can configure individually\n";
print "\n";
if ( lc($default_use_javascript_addr_book) eq "true" ) {
$default_value = "y";
} else {
$default_use_javascript_addr_book = "false";
$default_value = "n";
}
print "Use javascript version by default (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = <STDIN>;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$default_use_javascript_addr_book = "true";
} else {
$default_use_javascript_addr_book = "false";
}
return $default_use_javascript_addr_book;
}
# global filebased address book
sub command63 {
print "If you want to use global file address book, then you\n";
print "must set this option to a valid value. If option does\n";
print "not have path elements, system assumes that file is\n";
print "stored in data directory. If relative path is set, it is\n";
print "relative to main squirrelmail directory. If value is empty,\n";
print "address book is not enabled.\n";
print "\n";
print "[$WHT$abook_global_file$NRM]: $WHT";
$new_abook_global_file = <STDIN>;
if ( $new_abook_global_file eq "\n" ) {
$new_abook_global_file = $abook_global_file;
} else {
$new_abook_global_file =~ s/[\r\n]//g;
}
return $new_abook_global_file;
}
# writing into global filebased abook control
sub command64 {
print "This setting controls writing into global file address\n";
print "book options. Address book file must be writeable by\n";
print "webserver's user, if you want to enable this option.\n";
print "\n";
if ( lc($abook_global_file_writeable) eq 'true' ) {
$default_value = "y";
} else {
$abook_global_file_writeable = 'false';
$default_value = "n";
}
print "Allow writing into global file address book (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = <STDIN>;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$abook_global_file_writeable = 'true';
} else {
$abook_global_file_writeable = 'false';
}
return $abook_global_file_writeable;
}
# listing of global filebased abook control
sub command_abook_global_file_listing {
print "This setting controls listing of global file address book.\n";
print "\n";
if ( lc($abook_global_file_listing) eq 'true' ) {
$default_value = "y";
} else {
$abook_global_file_listing = 'false';
$default_value = "n";
}
print "Allow listing of global file address book (y/n) [$WHT$default_value$NRM]: $WHT";
$new_show = <STDIN>;
if ( ( $new_show =~ /^y\n/i ) || ( ( $new_show =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$abook_global_file_listing = 'true';
} else {
$abook_global_file_listing = 'false';
}
return $abook_global_file_listing;
}
# controls $abook_file_line_length setting
sub command_abook_file_line_length {
print "This setting controls space allocated to file based address book records.\n";
print "End users will be unable to save address book entry, if total entry size \n";
print "(quoted address book fields + 4 delimiters + linefeed) exceeds allowed \n";
print "address book length size.\n";
print "\n";
print "Same setting is applied to personal and global file based address books.\n";
print "\n";
print "It is strongly recommended to keep default setting value. Change it only\n";
print "if you really want to store address book entries that are bigger than two\n";
print "kilobytes (2048).\n";
print "\n";
print "Enter allowed address book line length [$abook_file_line_length]: ";
my $tmp = <STDIN>;
$tmp = trim($tmp);
# value is not modified, if user hits Enter or enters space
if ($tmp ne '') {
# make sure that input is numeric
if ($tmp =~ /^\d+$/) {
$abook_file_line_length = $tmp;
} else {
print "If you want to change this setting, you must enter number.\n";
print "If you want to keep original setting - enter space.\n\n";
print "Press Enter to continue...";
$tmp = <STDIN>;
}
}
}
####################################################################################
#### Database ####
sub command91 {
print "If you want to store your users address book details in a database then\n";
print "you need to set this DSN to a valid value. The format for this is:\n";
print "mysql://user:pass\@hostname/dbname\n";
print "Where mysql can be one of the databases PHP supports, the most common\n";
print "of these are mysql, msql and pgsql.\n";
print "Please ensure proper permissions for config.php when including\n";
print "sensitive passwords.\n\n";
print "If the DSN is left empty (hit space and then return) the database\n";
print "related code for address books will not be used.\n";
print "\n";
if ( $addrbook_dsn eq "" ) {
$default_value = "Disabled";
} else {
$default_value = $addrbook_dsn;
}
print "[$WHT$addrbook_dsn$NRM]: $WHT";
$new_dsn = <STDIN>;
if ( $new_dsn eq "\n" ) {
$new_dsn = "";
} else {
$new_dsn =~ s/[\r|\n]//g;
$new_dsn =~ s/^\s+$//g;
}
return $new_dsn;
}
sub command92 {
print "This is the name of the table you want to store the address book\n";
print "data in, it defaults to 'address'\n";
print "\n";
print "[$WHT$addrbook_table$NRM]: $WHT";
$new_table = <STDIN>;
if ( $new_table eq "\n" ) {
$new_table = $addrbook_table;
} else {
$new_table =~ s/[\r|\n]//g;
}
return $new_table;
}
sub command93 {
print "If you want to store your users preferences in a database then\n";
print "you need to set this DSN to a valid value. The format for this is:\n";
print "mysql://user:pass\@hostname/dbname\n";
print "Where mysql can be one of the databases PHP supports, the most common\n";
print "of these are mysql, msql and pgsql.\n";
print "Please ensure proper permissions for config.php when including\n";
print "sensitive passwords.\n\n";
print "If the DSN is left empty (hit space and then return) the database\n";
print "related code for address books will not be used.\n";
print "\n";
if ( $prefs_dsn eq "" ) {
$default_value = "Disabled";
} else {
$default_value = $prefs_dsn;
}
print "[$WHT$prefs_dsn$NRM]: $WHT";
$new_dsn = <STDIN>;
if ( $new_dsn eq "\n" ) {
$new_dsn = "";
} else {
$new_dsn =~ s/[\r|\n]//g;
$new_dsn =~ s/^\s+$//g;
}
return $new_dsn;
}
sub command94 {
print "This is the name of the table you want to store the preferences\n";
print "data in, it defaults to 'userprefs'\n";
print "\n";
print "[$WHT$prefs_table$NRM]: $WHT";
$new_table = <STDIN>;
if ( $new_table eq "\n" ) {
$new_table = $prefs_table;
} else {
$new_table =~ s/[\r|\n]//g;
}
return $new_table;
}
sub command95 {
print "This is the name of the field in which you want to store the\n";
print "username of the person the prefs are for. It defaults to 'user'\n";
print "\n";
print "[$WHT$prefs_user_field$NRM]: $WHT";
$new_field = <STDIN>;
if ( $new_field eq "\n" ) {
$new_field = $prefs_user_field;
} else {
$new_field =~ s/[\r|\n]//g;
}
return $new_field;
}
sub command96 {
print "This is the name of the field in which you want to store the\n";
print "preferences keyword. It defaults to 'prefkey'\n";
print "\n";
print "[$WHT$prefs_key_field$NRM]: $WHT";
$new_field = <STDIN>;
if ( $new_field eq "\n" ) {
$new_field = $prefs_key_field;
} else {
$new_field =~ s/[\r|\n]//g;
}
return $new_field;
}
sub command97 {
print "This is the name of the field in which you want to store the\n";
print "preferences value. It defaults to 'prefval'\n";
print "\n";
print "[$WHT$prefs_val_field$NRM]: $WHT";
$new_field = <STDIN>;
if ( $new_field eq "\n" ) {
$new_field = $prefs_val_field;
} else {
$new_field =~ s/[\r|\n]//g;
}
return $new_field;
}
sub command98 {
print "If you want to store your global address book in a database then\n";
print "you need to set this DSN to a valid value. The format for this is:\n";
print "mysql://user:pass\@hostname/dbname\n";
print "Where mysql can be one of the databases PHP supports, the most common\n";
print "of these are mysql, msql and pgsql.\n";
print "Please ensure proper permissions for config.php when including\n";
print "sensitive passwords.\n\n";
print "If the DSN is left empty (hit space and then return) the database\n";
print "related code for global SQL address book will not be used.\n";
print "\n";
if ( $addrbook_global_dsn eq "" ) {
$default_value = "Disabled";
} else {
$default_value = $addrbook_global_dsn;
}
print "[$WHT$addrbook_global_dsn$NRM]: $WHT";
$new_dsn = <STDIN>;
if ( $new_dsn eq "\n" ) {
$new_dsn = "";
} else {
$new_dsn =~ s/[\r\n]//g;
$new_dsn =~ s/^\s+$//g;
}
return $new_dsn;
}
sub command99 {
print "This is the name of the table you want to store the global address book\n";
print "data in. Default table name is 'global_abook'. Address book uses same\n";
print "database format as personal address book.\n";
print "\n";
print "[$WHT$addrbook_global_table$NRM]: $WHT";
$new_table = <STDIN>;
if ( $new_table eq "\n" ) {
$new_table = $addrbook_global_table;
} else {
$new_table =~ s/[\r\n]//g;
}
return $new_table;
}
sub command910 {
print "This option controls users\' ability to add or modify records stored \n";
print "in global address book\n";
if ( lc($addrbook_global_writeable) eq 'true' ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Allow writing into global address book? (y/n) [$WHT$default_value$NRM]: $WHT";
$addrbook_global_writeable = <STDIN>;
if ( ( $addrbook_global_writeable =~ /^y\n/i ) || ( ( $addrbook_global_writeable =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$addrbook_global_writeable = 'true';
} else {
$addrbook_global_writeable = 'false';
}
return $addrbook_global_writeable;
}
sub command911 {
print "Enable this option if you want to see listing of addresses stored \n";
print "in global address book\n";
if ( lc($addrbook_global_listing) eq 'true' ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Allow listing of global address book? (y/n) [$WHT$default_value$NRM]: $WHT";
$addrbook_global_listing = <STDIN>;
if ( ( $addrbook_global_listing =~ /^y\n/i ) || ( ( $addrbook_global_listing =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$addrbook_global_listing = 'true';
} else {
$addrbook_global_listing = 'false';
}
return $addrbook_global_listing;
}
####################################################################################
#### Languages ####
# Default language
sub commandA1 {
print "SquirrelMail attempts to set the language in many ways. If it\n";
print "can not figure it out in another way, it will default to this\n";
print "language. Please use the code for the desired language.\n";
print "\n";
print "[$WHT$squirrelmail_default_language$NRM]: $WHT";
$new_language = <STDIN>;
if ( $new_language eq "\n" ) {
$new_language = $squirrelmail_default_language;
} else {
$new_language =~ s/[\r|\n]//g;
$new_language =~ s/^\s+$//g;
}
return $new_language;
}
# Default Charset
sub commandA2 {
print "This option controls what character set is used when sending\n";
print "mail and when sending HTML to the browser.\n";
print "\n";
print "This option is used only when default language is 'en_US'.\n";
print "\n";
print "[$WHT$default_charset$NRM]: $WHT";
$new_default_charset = <STDIN>;
if ( $new_default_charset eq "\n" ) {
$new_default_charset = $default_charset;
} else {
$new_default_charset =~ s/[\r|\n]//g;
}
return $new_default_charset;
}
# Lossy encoding
sub commandA3 {
print "Enable this option if you want to allow lossy charset encoding in message\n";
print "composition pages. This option allows charset conversions when output\n";
print "charset does not support all symbols used in original charset. Symbols\n";
print "unsupported by output charset will be replaced with question marks.\n";
print "\n";
if ( lc($lossy_encoding) eq 'true' ) {
$default_value = "y";
} else {
$default_value = "n";
}
print "Enable lossy encoding? (y/n) [$WHT$default_value$NRM]: $WHT";
$lossy_encoding = <STDIN>;
if ( ( $lossy_encoding =~ /^y\n/i ) || ( ( $lossy_encoding =~ /^\n/ ) && ( $default_value eq "y" ) ) ) {
$lossy_encoding = 'true';
} else {
$lossy_encoding = 'false';
}
return $lossy_encoding;
}
#### End of menu functions
####################################################################################
sub save_data {
$tab = " ";
if ( open( CF, ">config.php" ) ) {
print CF "<?php\n";
print CF "\n";
print CF "/**\n";
print CF " * SquirrelMail Configuration File\n";
print CF " * Created using the configure script, conf.pl\n";
print CF " */\n";
print CF "\n";
print CF "global \$version;\n";
if ($print_config_version) {
print CF "\$config_version = '$print_config_version';\n";
}
# integer
print CF "\$config_use_color = $config_use_color;\n";
print CF "\n";
# string
print CF "\$org_name = \"$org_name\";\n";
# string
print CF "\$org_logo = " . &change_to_SM_path($org_logo) . ";\n";
$org_logo_width |= 0;
$org_logo_height |= 0;
# string
print CF "\$org_logo_width = '$org_logo_width';\n";
# string
print CF "\$org_logo_height = '$org_logo_height';\n";
# string that can contain variables.
print CF "\$org_title = \"$org_title\";\n";
# string
print CF "\$signout_page = " . &change_to_SM_path($signout_page) . ";\n";
# string
print CF "\$frame_top = '$frame_top';\n";
print CF "\n";
print CF "\$provider_uri = '$provider_uri';\n";
print CF "\n";
print CF "\$provider_name = '$provider_name';\n";
print CF "\n";
# string that can contain variables
print CF "\$motd = \"$motd\";\n";
print CF "\n";
# Language preferences
# string
print CF "\$squirrelmail_default_language = '$squirrelmail_default_language';\n";
# string
print CF "\$default_charset = '$default_charset';\n";
# boolean
print CF "\$lossy_encoding = $lossy_encoding;\n";
print CF "\n";
# Server settings
# string
print CF "\$domain = '$domain';\n";
# string
print CF "\$imapServerAddress = '$imapServerAddress';\n";
# integer
print CF "\$imapPort = $imapPort;\n";
# boolean
print CF "\$useSendmail = $useSendmail;\n";
# string
print CF "\$smtpServerAddress = '$smtpServerAddress';\n";
# integer
print CF "\$smtpPort = $smtpPort;\n";
# string
print CF "\$sendmail_path = '$sendmail_path';\n";
# string
print CF "\$sendmail_args = '$sendmail_args';\n";
# boolean
# print CF "\$use_authenticated_smtp = $use_authenticated_smtp;\n";
# boolean
print CF "\$pop_before_smtp = $pop_before_smtp;\n";
# string
print CF "\$pop_before_smtp_host = '$pop_before_smtp_host';\n";
# string
print CF "\$imap_server_type = '$imap_server_type';\n";
# boolean
print CF "\$invert_time = $invert_time;\n";
# string
print CF "\$optional_delimiter = '$optional_delimiter';\n";
# string
print CF "\$encode_header_key = '$encode_header_key';\n";
print CF "\n";
# string
print CF "\$default_folder_prefix = '$default_folder_prefix';\n";
# string
print CF "\$trash_folder = '$trash_folder';\n";
# string
print CF "\$sent_folder = '$sent_folder';\n";
# string
print CF "\$draft_folder = '$draft_folder';\n";
# boolean
print CF "\$default_move_to_trash = $default_move_to_trash;\n";
# boolean
print CF "\$default_move_to_sent = $default_move_to_sent;\n";
# boolean
print CF "\$default_save_as_draft = $default_save_as_draft;\n";
# boolean
print CF "\$show_prefix_option = $show_prefix_option;\n";
# boolean
print CF "\$list_special_folders_first = $list_special_folders_first;\n";
# boolean
print CF "\$use_special_folder_color = $use_special_folder_color;\n";
# boolean
print CF "\$auto_expunge = $auto_expunge;\n";
# boolean
print CF "\$default_sub_of_inbox = $default_sub_of_inbox;\n";
# boolean
print CF "\$show_contain_subfolders_option = $show_contain_subfolders_option;\n";
# integer
print CF "\$default_unseen_notify = $default_unseen_notify;\n";
# integer
print CF "\$default_unseen_type = $default_unseen_type;\n";
# boolean
print CF "\$auto_create_special = $auto_create_special;\n";
# boolean
print CF "\$delete_folder = $delete_folder;\n";
# boolean
print CF "\$noselect_fix_enable = $noselect_fix_enable;\n";
print CF "\n";
# General options
# string
print CF "\$data_dir = " . &change_to_SM_path($data_dir) . ";\n";
# string that can contain a variable
print CF "\$attachment_dir = " . &change_to_SM_path($attachment_dir) . ";\n";
# integer
print CF "\$dir_hash_level = $dir_hash_level;\n";
# string
print CF "\$default_left_size = '$default_left_size';\n";
# boolean
print CF "\$force_username_lowercase = $force_username_lowercase;\n";
# boolean
print CF "\$default_use_priority = $default_use_priority;\n";
# boolean
print CF "\$hide_sm_attributions = $hide_sm_attributions;\n";
# boolean
print CF "\$default_use_mdn = $default_use_mdn;\n";
# boolean
print CF "\$edit_identity = $edit_identity;\n";
# boolean
print CF "\$edit_name = $edit_name;\n";
# boolean
print CF "\$hide_auth_header = $hide_auth_header;\n";
# boolean
print CF "\$allow_thread_sort = $allow_thread_sort;\n";
# boolean
print CF "\$allow_server_sort = $allow_server_sort;\n";
# boolean
print CF "\$allow_charset_search = $allow_charset_search;\n";
# boolean
print CF "\$uid_support = $uid_support;\n";
print CF "\n";
# all plugins are strings
for ( $ct = 0 ; $ct <= $#plugins ; $ct++ ) {
print CF "\$plugins[$ct] = '$plugins[$ct]';\n";
}
print CF "\n";
# strings
print CF "\$theme_css = " . &change_to_SM_path($theme_css) . ";\n";
if ( $theme_default eq '' ) { $theme_default = '0'; }
print CF "\$theme_default = $theme_default;\n";
for ( $count = 0 ; $count <= $#theme_name ; $count++ ) {
print CF "\$theme[$count]['PATH'] = " . &change_to_SM_path($theme_path[$count]) . ";\n";
# escape theme name so it can contain single quotes.
$esc_name = $theme_name[$count];
$esc_name =~ s/\\/\\\\/g;
$esc_name =~ s/'/\\'/g;
print CF "\$theme[$count]['NAME'] = '$esc_name';\n";
}
print CF "\n";
## Address books
# boolean
print CF "\$default_use_javascript_addr_book = $default_use_javascript_addr_book;\n";
for ( $count = 0 ; $count <= $#ldap_host ; $count++ ) {
print CF "\$ldap_server[$count] = array(\n";
# string
print CF " 'host' => '$ldap_host[$count]',\n";
# string
print CF " 'base' => '$ldap_base[$count]'";
if ( $ldap_name[$count] ) {
print CF ",\n";
# string
print CF " 'name' => '$ldap_name[$count]'";
}
if ( $ldap_port[$count] ) {
print CF ",\n";
# integer
print CF " 'port' => $ldap_port[$count]";
}
if ( $ldap_charset[$count] ) {
print CF ",\n";
# string
print CF " 'charset' => '$ldap_charset[$count]'";
}
if ( $ldap_maxrows[$count] ) {
print CF ",\n";
# integer
print CF " 'maxrows' => $ldap_maxrows[$count]";
}
if ( $ldap_binddn[$count] ) {
print CF ",\n";
# string
print CF " 'binddn' => '$ldap_binddn[$count]'";
if ( $ldap_bindpw[$count] ) {
print CF ",\n";
# string
print CF " 'bindpw' => '$ldap_bindpw[$count]'";
}
}
if ( $ldap_protocol[$count] ) {
print CF ",\n";
# integer
print CF " 'protocol' => $ldap_protocol[$count]";
}
print CF "\n";
print CF ");\n";
print CF "\n";
}
# Global file based address book
# string
print CF "\$abook_global_file = '$abook_global_file';\n";
# boolean
print CF "\$abook_global_file_writeable = $abook_global_file_writeable;\n";
# boolean
print CF "\$abook_global_file_listing = $abook_global_file_listing;\n";
# integer
print CF "\$abook_file_line_length = $abook_file_line_length;\n\n";
## Database
# string
print CF "\$addrbook_dsn = '$addrbook_dsn';\n";
# string
print CF "\$addrbook_table = '$addrbook_table';\n\n";
# string
print CF "\$prefs_dsn = '$prefs_dsn';\n";
# string
print CF "\$prefs_table = '$prefs_table';\n";
# string
print CF "\$prefs_user_field = '$prefs_user_field';\n";
# string
print CF "\$prefs_key_field = '$prefs_key_field';\n";
# string
print CF "\$prefs_val_field = '$prefs_val_field';\n";
# string
print CF "\$addrbook_global_dsn = '$addrbook_global_dsn';\n";
# string
print CF "\$addrbook_global_table = '$addrbook_global_table';\n";
# boolean
print CF "\$addrbook_global_writeable = $addrbook_global_writeable;\n";
# boolean
print CF "\$addrbook_global_listing = $addrbook_global_listing;\n\n";
# boolean
print CF "\$no_list_for_subscribe = $no_list_for_subscribe;\n";
# string
print CF "\$smtp_auth_mech = '$smtp_auth_mech';\n";
print CF "\$imap_auth_mech = '$imap_auth_mech';\n";
print CF "\$smtp_sitewide_user = '" . quote_single($smtp_sitewide_user) . "';\n";
print CF "\$smtp_sitewide_pass = '" . quote_single($smtp_sitewide_pass) . "';\n";
# boolean
print CF "\$use_imap_tls = $use_imap_tls;\n";
print CF "\$use_smtp_tls = $use_smtp_tls;\n";
print CF "\$session_name = '$session_name';\n";
# boolean
print CF "\$only_secure_cookies = $only_secure_cookies;\n";
print CF "\$disable_security_tokens = $disable_security_tokens;\n";
# string
print CF "\$check_referrer = '$check_referrer';\n";
print CF "\n";
print CF "\$config_location_base = '$config_location_base';\n";
print CF "\n";
print CF "\@include SM_PATH . 'config/config_local.php';\n";
print CF "\n";
close CF;
print "Data saved in config.php\n";
} else {
print "Error saving config.php: $!\n";
}
}
sub set_defaults {
clear_screen();
print $WHT. "SquirrelMail Configuration : " . $NRM;
if ( $config == 1 ) { print "Read: config.php"; }
elsif ( $config == 2 ) { print "Read: config_default.php"; }
print "\n";
print "---------------------------------------------------------\n";
print "While we have been building SquirrelMail, we have discovered some\n";
print "preferences that work better with some servers that don't work so\n";
print "well with others. If you select your IMAP server, this option will\n";
print "set some pre-defined settings for that server.\n";
print "\n";
print "Please note that you will still need to go through and make sure\n";
print "everything is correct. This does not change everything. There are\n";
print "only a few settings that this will change.\n";
print "\n";
$continue = 0;
while ( $continue != 1 ) {
print "Please select your IMAP server:\n";
print $list_supported_imap_servers;
print "\n";
print " quit = Do not change anything\n";
print "Command >> ";
$server = <STDIN>;
$server =~ s/[\r|\n]//g;
# variable is used to display additional messages.
$message = "";
print "\n";
if ( $server eq "cyrus" ) {
$imap_server_type = "cyrus";
$default_folder_prefix = "";
$trash_folder = "INBOX.Trash";
$sent_folder = "INBOX.Sent";
$draft_folder = "INBOX.Drafts";
$show_prefix_option = false;
$default_sub_of_inbox = true;
$show_contain_subfolders_option = false;
$optional_delimiter = ".";
$disp_default_folder_prefix = "<none>";
$continue = 1;
} elsif ( $server eq "uw" ) {
$imap_server_type = "uw";
$default_folder_prefix = "mail/";
$trash_folder = "Trash";
$sent_folder = "Sent";
$draft_folder = "Drafts";
$show_prefix_option = true;
$default_sub_of_inbox = false;
$show_contain_subfolders_option = true;
$optional_delimiter = "/";
$disp_default_folder_prefix = $default_folder_prefix;
$delete_folder = true;
$continue = 1;
} elsif ( $server eq "exchange" ) {
$imap_server_type = "exchange";
$default_folder_prefix = "";
$default_sub_of_inbox = true;
$trash_folder = "INBOX/Deleted Items";
$sent_folder = "INBOX/Sent Items";
$drafts_folder = "INBOX/Drafts";
$show_prefix_option = false;
$show_contain_subfolders_option = false;
$optional_delimiter = "detect";
$disp_default_folder_prefix = "<none>";
$continue = 1;
} elsif ( $server eq "courier" ) {
$imap_server_type = "courier";
$default_folder_prefix = "INBOX.";
$trash_folder = "Trash";
$sent_folder = "Sent";
$draft_folder = "Drafts";
$show_prefix_option = false;
$default_sub_of_inbox = false;
$show_contain_subfolders_option = false;
$optional_delimiter = ".";
$disp_default_folder_prefix = $default_folder_prefix;
$delete_folder = true;
$continue = 1;
} elsif ( $server eq "macosx" ) {
$imap_server_type = "macosx";
$default_folder_prefix = "INBOX/";
$trash_folder = "Trash";
$sent_folder = "Sent";
$draft_folder = "Drafts";
$show_prefix_option = false;
$default_sub_of_inbox = true;
$show_contain_subfolders_option = false;
$optional_delimiter = "detect";
$allow_charset_search = false;
$disp_default_folder_prefix = $default_folder_prefix;
$continue = 1;
} elsif ( $server eq "hmailserver" ) {
$imap_server_type = "hmailserver";
$default_folder_prefix = "";
$trash_folder = "INBOX.Trash";
$sent_folder = "INBOX.Sent";
$draft_folder = "INBOX.Drafts";
$show_prefix_option = false;
$default_sub_of_inbox = true;
$show_contain_subfolders_option = false;
$optional_delimiter = "detect";
$allow_charset_search = false;
$disp_default_folder_prefix = $default_folder_prefix;
$delete_folder = false;
$force_username_lowercase = false;
$continue = 1;
} elsif ( $server eq "mercury32" ) {
$imap_server_type = "mercury32";
$default_folder_prefix = "";
$trash_folder = "Trash";
$sent_folder = "Sent";
$draft_folder = "Drafts";
$show_prefix_option = false;
$default_sub_of_inbox = true;
$show_contain_subfolders_option = true;
$optional_delimiter = "detect";
$delete_folder = true;
$force_username_lowercase = true;
$continue = 1;
} elsif ( $server eq "dovecot" ) {
$imap_server_type = "dovecot";
$default_folder_prefix = "";
$trash_folder = "Trash";
$sent_folder = "Sent";
$draft_folder = "Drafts";
$show_prefix_option = false;
$default_sub_of_inbox = false;
$show_contain_subfolders_option = false;
$delete_folder = false;
$force_username_lowercase = true;
$optional_delimiter = "detect";
$disp_default_folder_prefix = "<none>";
$continue = 1;
} elsif ( $server eq "bincimap" ) {
$imap_server_type = "bincimap";
$default_folder_prefix = "INBOX/";
$trash_folder = "Trash";
$sent_folder = "Sent";
$draft_folder = "Drafts";
$show_prefix_option = false;
$default_sub_of_inbox = false;
$show_contain_subfolders_option = false;
$delete_folder = true;
$force_username_lowercase = false;
$optional_delimiter = "detect";
$disp_default_folder_prefix = $default_folder_prefix;
# Default folder prefix depends on used depot.
$message = "\nIf you use IMAPdir depot, you must set default folder prefix to empty string.\n";
$continue = 1;
} elsif ( $server eq "gmail" ) {
$imap_server_type = "gmail";
$default_folder_prefix = "";
$trash_folder = "[Gmail]/Trash";
$default_move_to_trash = true;
$sent_folder = "[Gmail]/Sent Mail";
$draft_folder = "[Gmail]/Drafts";
$auto_create_special = false;
$show_prefix_option = false;
$default_sub_of_inbox = false;
$show_contain_subfolders_option = false;
$delete_folder = true;
$force_username_lowercase = false;
$optional_delimiter = "/";
$disp_default_folder_prefix = "<none>";
$domain = "gmail.com";
$imapServerAddress = "imap.gmail.com";
$imapPort = 993;
$use_imap_tls = true;
$imap_auth_mech = "login";
$smtpServerAddress = "smtp.gmail.com";
$smtpPort = 465;
$pop_before_smtp = false;
$useSendmail = false;
$use_smtp_tls = true;
$smtp_auth_mech = "login";
$continue = 1;
# Gmail changes system folder names (Drafts, Sent, Trash) out
# from under you when the user changes language settings
$message = "\nNOTE! When a user changes languages in Gmail's interface, the\n"
. "Drafts, Sent and Trash folder names are changed to localized\n"
. "versions thereof. To see those folders correctly in SquirrelMail,\n"
. "the user should change the SquirrelMail language to match.\n"
. "Moreover, SquirrelMail then needs to be told what folders to use\n"
. "for Drafts, Sent and Trash in Options --> Folder Preferences.\n"
. "These default settings will only correctly find the Sent, Trash\n"
. "and Drafts folders if both Gmail and SquirrelMail languages are\n"
. "set to English.\n\n"
. "Also note that in some regions (Europe?), the default folder\n"
. "names (see main menu selection 3. Folder Defaults) are different\n"
. "(they may need to have the prefix \"[Google Mail]\" instead of\n"
. "\"[Gmail]\") and \"Trash\" may be called \"Bin\" instead.\n";
} elsif ( $server eq "quit" ) {
$continue = 1;
} else {
$disp_default_folder_prefix = $default_folder_prefix;
print "Unrecognized server: $server\n";
print "\n";
}
print " imap_server_type = $imap_server_type\n";
print " default_folder_prefix = $disp_default_folder_prefix\n";
print " trash_folder = $trash_folder\n";
print " sent_folder = $sent_folder\n";
print " draft_folder = $draft_folder\n";
print " show_prefix_option = $show_prefix_option\n";
print " default_sub_of_inbox = $default_sub_of_inbox\n";
print "show_contain_subfolders_option = $show_contain_subfolders_option\n";
print " optional_delimiter = $optional_delimiter\n";
print " delete_folder = $delete_folder\n";
print "$message";
}
print "\nPress any key to continue...";
$tmp = <STDIN>;
}
# This subroutine corrects relative paths to ensure they
# will work within the SM space. If the path falls within
# the SM directory tree, the SM_PATH variable will be
# prepended to the path, if not, then the path will be
# converted to an absolute path, e.g.
# '../images/logo.gif' --> SM_PATH . 'images/logo.gif'
# '../../someplace/data' --> '/absolute/path/someplace/data'
# 'images/logo.gif' --> SM_PATH . 'config/images/logo.gif'
# '/absolute/path/logo.gif' --> '/absolute/path/logo.gif'
# 'C:\absolute\path\logo.gif' --> 'C:\absolute\path\logo.gif'
# 'http://whatever/' --> 'http://whatever'
# $some_var/path --> "$some_var/path"
sub change_to_SM_path() {
my ($old_path) = @_;
my $new_path = '';
my @rel_path;
my @abs_path;
my $subdir;
# If the path is absolute, don't bother.
return "\'" . $old_path . "\'" if ( $old_path eq '');
return "\'" . $old_path . "\'" if ( $old_path =~ /^(\/|http)/ );
return "\'" . $old_path . "\'" if ( $old_path =~ /^\w:(\\|\/)/ );
return $old_path if ( $old_path =~ /^\'(\/|http)/ );
return $old_path if ( $old_path =~ /^\'\w:\// );
return $old_path if ( $old_path =~ /^SM_PATH/);
if ( $old_path =~ /^\$/ ) {
# check if it's a single var, or a $var/path combination
# if it's $var/path, enclose in ""
if ( $old_path =~ /\// ) {
return '"'.$old_path.'"';
}
return $old_path;
}
# Remove remaining '
$old_path =~ s/\'//g;
# For relative paths, split on '../'
@rel_path = split(/\.\.\//, $old_path);
if ( $#rel_path > 1 ) {
# more than two levels away. Make it absolute.
@abs_path = split(/\//, $dir);
# Lop off the relative pieces of the absolute path..
for ( $i = 0; $i <= $#rel_path; $i++ ) {
pop @abs_path;
shift @rel_path;
}
push @abs_path, @rel_path;
$new_path = "\'" . join('/', @abs_path) . "\'";
} elsif ( $#rel_path > 0 ) {
# it's within the SM tree, prepend SM_PATH
$new_path = $old_path;
$new_path =~ s/^\.\.\//SM_PATH . \'/;
$new_path .= "\'";
} else {
# Last, it's a relative path without any leading '.'
# Prepend SM_PATH and config, since the paths are
# relative to the config directory
$new_path = "SM_PATH . \'config/" . $old_path . "\'";
}
return $new_path;
}
# Change SM_PATH to admin-friendly version, e.g.:
# SM_PATH . 'images/logo.gif' --> '../images/logo.gif'
# SM_PATH . 'config/some.php' --> 'some.php'
# '/absolute/path/logo.gif' --> '/absolute/path/logo.gif'
# 'http://whatever/' --> 'http://whatever'
sub change_to_rel_path() {
my ($old_path) = @_;
my $new_path = $old_path;
if ( $old_path =~ /^SM_PATH/ ) {
$new_path =~ s/^SM_PATH . \'/\.\.\//;
$new_path =~ s/\.\.\/config\///;
}
return $new_path;
}
# Attempts to auto-detect if a specific auth mechanism is supported.
# Called by 'command112a' and 'command112b'
# ARGS: service-name (IMAP or SMTP), host:port, mech-name (ie. CRAM-MD5)
sub detect_auth_support {
# Try loading IO::Socket
unless (eval("use IO::Socket; 1")) {
print "Perl IO::Socket module is not available.";
return undef;
}
# Misc setup
my $service = shift;
my $host = shift;
my $mech = shift;
# Sanity checks
if ((!defined($service)) or (!defined($host)) or (!defined($mech))) {
# Error - wrong # of args
print "BAD ARGS!\n";
return undef;
}
if ($service eq 'SMTP') {
$cmd = "AUTH $mech\r\n";
$logout = "QUIT\r\n";
} elsif ($service eq 'IMAP') {
$cmd = "A01 AUTHENTICATE $mech\n";
$logout = "C01 LOGOUT\n";
} else {
# unknown service - whoops.
return undef;
}
# Get this show on the road
my $sock=IO::Socket::INET->new($host);
if (!defined($sock)) {
# Connect failed
return undef;
}
my $discard = <$sock>; # Server greeting/banner - who cares..
if ($service eq 'SMTP') {
# Say hello first..
print $sock "HELO $domain\r\n";
$discard = <$sock>; # Yeah yeah, you're happy to see me..
}
print $sock $cmd;
my $response = <$sock>;
chomp($response);
if (!defined($response)) {
return undef;
}
# So at this point, we have a response, and it is (hopefully) valid.
if ($service eq 'SMTP') {
if (!($response =~ /^334/)) {
# Not supported
print $sock $logout;
close $sock;
return 'NO';
}
} elsif ($service eq 'IMAP') {
if ($response =~ /^A01/) {
# Not supported
close $sock;
return 'NO';
}
} else {
# Unknown service - this shouldn't be able to happen.
close $sock;
return undef;
}
# If it gets here, the mech is supported
print $sock "*\n"; # Attempt to cancel authentication
print $sock $logout; # Try to log out, but we don't really care if this fails
close $sock;
return 'YES';
}
sub clear_screen() {
if ( $^O =~ /^mswin/i) {
system "cls";
} else {
system "clear";
}
}
# Quotes safely strings containing single quote
sub quote_single($) {
my $string = shift(@_);
$string =~ s/\'/\\'/g;
return $string;
}
# trims whitespace
# Example code from O'Reilly Perl Cookbook
sub trim {
my @out = @_;
for (@out) {
s/^\s+//;
s/\s+$//;
}
return wantarray ? @out : $out[0];
}
# checks IMAP mailbox name. Detect 8bit input and special characters
# returns 0 (folder name is not correct) or 1 (folder name is correct)
sub check_imap_folder($) {
my $folder_name = shift(@_);
if ($folder_name =~ /[\x80-\xFFFF]/) {
print "Folder name contains 8bit characters. Configuration utility requires\n";
print "UTF7-IMAP encoded folder names.\n";
print "Press any key to continue...";
my $tmp = <STDIN>;
return 0;
} elsif ($folder_name =~ /[&\*\%]/) {
# check for ampersand and list-wildcards
print "Folder name contains special UTF7-IMAP characters.\n";
print "Are you sure that folder name is correct? (yN): ";
my $tmp = <STDIN>;
$tmp = lc(trim($tmp));
if ($tmp =~ /^y$/) {
return 1;
} else {
return 0;
}
} else {
return 1;
}
}
ACC SHELL 2018